Best Tile Floor Cleaner: What Works for Different Types of Tiles

Tiles are a long-term investment in residential and commercial areas. They are both strong and stylish, yet when they are not taken care of, even the finest floors may lose their appeal. Each type of tile, quarry, ceramic, vitrified, or mosaic, has unique properties, which means choosing the right tile floor cleaning solution is critical.

Faber 30 is a professional-grade concentrated cleaner that we recommend at Flagstone Fix. Made to be used indoors and outdoors, it is a solvent-free product but strong enough to work on grease, oil, and organic residues on various tile surfaces. Recognised as the best floor tile cleaning solution, Faber 30 ensures reliable results across multiple applications, including ceramic tile floor cleaning.

Quarry Tile Floors

Quarry tiles are made of unglazed clay-based tiles, which are very strong and are commonly used in the kitchen, patio and industrial places. They are porous and thus absorb oils and grease easily, making them difficult to maintain using common products. The concentrated formula of Faber 30 is suitable to be use on quarry tiles and offers a deep cleaning that makes the surface re-cleaned, but does not change its toughness. For facilities where performance and hygiene are essential, this professional tile floor cleaning solution is the go-to option.

Ceramic and Porcelain Tile Floors

Glazed ceramic tiles and more water-resistant and denser porcelain tiles are commonly used in households and commercial establishments. These tiles, though robust, are susceptible to the surface film and accumulation of dirt in the grout lines. A simple cleaner is not enough to clean up ceramic tile floors. Faber 30 helps to solve this problem by dissolving greasy formations and removing organic dirt, leaving surfaces and grout lines cleansed without damaging the finish on the tile. This makes it the best floor tile cleaning solution for both ceramic and porcelain floors.

Vitrified Tile Floors

Vitrified tiles are manufactured in a process of high temperature, making them tough, impervious, and they are also glossy in most cases. Although this renders them resistant to stains, it also implies that this results in marks, smudges, and scuffs being conspicuous. Regular cleaning may not fully restore their polished look. Faber 30 provides a powerful tile floor cleaning solution by effectively removing greasy films and residues while protecting the reflective finish. For high-traffic spaces that demand perfection, it stands out as the best floor tile cleaning solution.

Mosaic Tile Floors

Mosaic tiles: composed of minuscule units of artwork, which might be of ceramic, glass, or stone, add ornament, yet are difficult to keep clean because of their numerous joints and uneven surfaces. Grout and textured surfaces may accumulate dirt, soap scum and grease. Faber 30 provides a good solution, which removes the accumulation of the tile and the grout without compromising the finer finish. When it comes to intricate surfaces, no other tile floor cleaning solution matches Faber 30’s performance as the best floor tile cleaning solution.

How to Use Faber 30

Surface Preparation

Equipment
White pad, Single disc machine, Hard floor cleaner.

• Sweep off dust and waste materials and rough dirt using broom or vacuum.
• Work with small areas that are the size of the absorption material.
• To treat ≤ 4 -5 m2 at a time on highly absorbent surfaces (e.g. terracotta).
• In case of low-absorption materials (polished stone, ceramic) larger spots are permissible.

Pre-test

• Test should always be carried out on an unsanitized piece of material that is not in use to ensure that it is appropriate.

Dilution guidelines

• Apply using either undiluted or diluted format basing on surface and soil:
  • Last process stage abatement of adamantous resin/ dissolve- hard-to-isolate resin: 50% solution in cleaned water.
  • Absorbent material (terracotta, concrete): it is possible to utilize it in its pure state (1:1).
  • Strong degreasing / cleaning the worksite on the acid-sensitive surface: 20-30% (1:2-1:4).
  • Degrase- wiping routine: every second four hours 10% (1: 9).

Application

• Spread solution evenly and dispense using one disc machine or broad brush.
• Allow to incubate 10-15 minutes mixing occasionally with single-disc machine.
• You apply product to absorbent surfaces on the surfaces during the cleaning process to ensure you have a fine layer towards the product.
• Choose pad/brush depending on type of material and dirt: white pad (polished/delicate) marble, limestone, glazed and green/light-blue pad ( rough/unpolished) terrazzo, concrete.

Removal & rinse

• Adding of clean water to emulsify after contact time, use machine/brush and wipe off extra (better do it with a wet vacuum).
• Rinse thoroughly; repeat if necessary.

Resume use

In case of reapplication, the surface should be quite dry; it depends on the material and absorption.
Open up the floor again after rinsing and completely dry.

Final Thought

The cleaning requirements of every type of tile vary, including porous quarry tiles, polished vitrified tiles and complex mosaics. The common factor is that they all require a professional-grade tile floor cleaning solution. Faber 30, sold in Flagstone Fix, is solvent-free, concentrated and tested on all types of tiles. Whether you’re handling ceramic tile floor cleaning at home or searching for the best floor tile cleaning solution for large-scale commercial projects, Faber 30 is the cleaner that works.