HIDROFAB

HIDROFAB Hidro Fab for Natural Stone, Terracotta & Concrete

Price & buy on zyax.in Ask about this product on WhatsApp

Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.

Description

Faber HIDROFAB is a self-polishing floor finish for natural stone, cotto, terracotta, parquet, wood and concrete: a water-based wax-resin emulsion that seals the surface against dirt.

HIDROFAB is a water-based wax-resin emulsion to use as a self-polishing, finishing treatment for floors in natural stone, cotto, terracotta, parquet, natural wood, or concrete. The product seals the textured surface, creating a dirt-proof layer and making daily cleaning and maintenance operations on the floor much easier.

Treatment with HIDROFAB leaves the surface with a polished finish and slightly enhances the original colour tone of the material.

Where to use HIDROFAB

Floors in cotto and terracotta, natural stone, concrete and ceramic tiles. Indoor use only.

Key benefits of HIDROFAB

  • Water-based liquid wax
  • Polished finish
  • Protects floors and makes maintenance easier

HIDROFAB compared with other Faber waxes and care products

ProductBest for
LIQUID WAXPolishing and enhancing liquid wax for natural stone
SOLID WAXPolishing and enhancing solid wax for natural stone
HIDROFABWater-based liquid wax with a polished finish for cotto, stone, concrete and ceramic floors
TOP CAREMaintenance cream that boosts gloss and brightness on stone worktops

Not sure which product you need?

Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.

Product information based on Faber Italy technical documentation.

Coverage: about 15–20 m² (161–215 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.

Guide: for how and when to use it, read our Kota stone polish guide.

How to use

  1. Clean the surface thoroughly, removing dust and dirt; protect adjacent areas
  2. Apply an even, abundant coat to the clean, dry surface, always in the same direction
  3. Let the first coat dry fully (generally 2-3 hours between coats)
  4. Apply a second coat perpendicular to the first
  5. Optional: after at least 3-4 hours cure, buff the surface dry
  6. Maintenance restoration: use HIDROFAB diluted 1:5 in water
Mixing ratioundiluted; 1:5 in water for regular restoration
Coatsone or two coats (second only once first is perfectly dry)
Drying and curingdry in 1-2 hours; 2-3 hours between coats; foot traffic after about 4-6 hours
Application temperature+5 to +40°C surface temperature
Toolslambswool applicator, roller

Before you start:

  • Never apply to wet/damp, overheated or acid-treated surfaces; not for outdoor use
  • Test a small, unexposed area first

Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).

Helpful guides for HIDROFAB

Chat with us