P147

P147 Colour-Enhancing Impregnator for Natural Stone, Cotto & Terracotta

Price & buy on zyax.in Ask about this product on WhatsApp

Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.

Switching from Akemi Colour Intensifier? This is our closest match for the same job. Compare Akemi and Roff alternatives

Description

Faber P147 is a solvent-based wet look colour enhancer for terracotta, cotto, natural stone and agglomerates. The impregnating, stain-proof treatment enhances colour and tone with a matt finish and no surface film on materials of medium to medium-high absorption.

P147 is a solvent-based, impregnating, color-enhancing, stain-proof, and wet-look non-filming treatment. It is used to enhance the colour and tone of absorbent surfaces, adding a matt finish without creating a surface film.

P147 is recommended for treating natural stone, agglomerates, cotto and terracotta, and all materials with a medium and medium-high level of absorption.

Where to use P147

Natural stone with medium to medium-high absorbency, on aged, brushed and honed finishes of marble, travertine, limestone and granite, and on lava stone, basalt, sandstone, quartzite, slate, cotto, cement tiles and concrete. Not suitable for shiny surfaces.

Key benefits of P147

  • Enhances tone and colour with a matt wet-look effect
  • Protects against water- and oil-based stains
  • Solvent-based
  • Also available in a BLACK version for black surfaces

P147 compared with other Faber colour-enhancing stain protectors

ProductBest for
MA 90Solvent-based, for medium to medium-high absorbency stone; satin wet-look
MA 90/VSolvent-based, for medium-high to highly absorbent stone; deeper, glossier wet-look
P147Solvent-based, for medium to medium-high absorbency stone; matt wet-look
P 147 BLACKP147 formulated specifically for black-coloured surfaces
WET LOOK ECOWater-based; for materials with medium-high absorption; satin or matt wet-look, no surface patina
DEEP ENHANCERSolvent-based, for low-absorbency stone and quartz agglomerates; matt wet-look
DEEP ENHANCER BLACKDEEP ENHANCER formulated specifically for black-coloured surfaces

Not sure which product you need?

Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.

Product information based on Faber Italy technical documentation.

Coverage: about 15–20 m² (161–215 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.

Guide: for how and when to use it, read our Kota stone colour enhancer guide.

How to use

  1. Clean surface of dust and dirt; never on wet or damp surfaces; protect adjacent surfaces
  2. Test on an unexposed area or unused piece first
  3. Apply an even coat to the clean, dry surface
  4. After 5-10 minutes redistribute excess with the same tool
  5. After 20-30 minutes (up to 45-60 min for deeper penetration) remove all residue with floor polisher (1.5 HP, 175 rpm) and white or lambswool pad
Drying and curingDries within 1-2 hours; resume use after 4-6 hours
Application temperature+5 to +35°C
ToolsBrush, lambswool applicator, roller, cloth; floor polisher with white/lambswool pad for residue

Before you start:

  • Do not apply if rain or frost is imminent, or in fog/high humidity
  • Do not apply to overly heated surfaces

Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).

Helpful guides for P147

Chat with us