


DENSI-SHIELD 200
DENSI-SHIELD 200 Stone Densifier for Natural Stone
Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.
Switching from Roff Durastone 200? This is our closest match for the same job. Compare Akemi and Roff alternatives
Description
Flagstone Fix DENSI-SHIELD 200 is a ready-to-use, water-based stone densifier after 200 grit grinding that strengthens and hardens natural stone. It penetrates deep to increase density, durability and gloss; softer stones may need multiple applications.
DENSI-SHIELD 200 is a premium, ready-to-use, water-based densifying system designed to strengthen and harden natural stone surfaces. Applied after grinding at 200 grit, it penetrates deep into the stone, increasing its density, durability and gloss. Ideal for both residential and commercial applications. Multiple applications may be required for softer stones. While it enhances stone strength, regular maintenance is recommended. It is not a sealer and will not prevent oil and dust from penetrating. Ensure proper ventilation and surface preparation before application for optimal results.
How to use
- Use after 200 grit grinding, on a surface free of dust, oil and sealers
- Cover nearby areas to keep the densifier off them
- Apply with a mop or sponge
- Spread evenly with a soft cloth or sponge
- Reapply until the surface is saturated
- Let it dry for 24 hours before polishing or further treatment
| Dilution | Ready to use |
|---|---|
| Coats | Reapply until saturated; softer stones may need several applications |
| Drying and curing | 24 hours before further polishing |
| Application temperature | Above 4°C |
| Tools | Mop, sponge, soft cloth |
Before you start:
- Use protective equipment and keep the area ventilated
- Do not inhale
- It is not a sealer and will not stop oil or dirt penetrating
Directions summarised from the Flagstone Fix technical data sheet. Read the full data sheet (PDF).



