

FS DARKENER PLUS X
FS DARKENER PLUS X Wet-Look Colour Enhancer for Granite & Dark Natural Stone
Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.
Downloads
Switching from Roff Ager or Akemi Darkener Plus? This is our closest match for the same job. Compare Akemi and Roff alternatives
Description
Flagstone Fix DARKENER PLUS X is a ready-to-use, solvent-based wet look stone darkener made with modified silanes that penetrate natural stone. It enriches the stone’s natural colour with a deep wet-look finish, resists oil, water and stains, stays breathable and suits indoor and outdoor granite, lime-based, silicate-based and dark-toned stone.
FS Darkener Plus X is a ready-to-use, solvent-based stone treatment made with modified silanes that deeply penetrate natural stone surfaces. It enriches the stone’s natural colour, delivering a deep wet-look finish while providing superior resistance to oil, water, and stains.
Designed for long-lasting performance, it remains breathable and is ideal for both indoor and outdoor applications on granite, lime-based stones, silicate-based stones, and other dark-toned surfaces. Remove any excess after about 60 minutes and allow 48–72 hours to cure fully.
How to use
- Remove dirt, debris, oils, waxes, epoxies and any existing coating
- Wash and dry the surface to remove salts that can block impregnation
- Do a patch test to check the change in appearance
- Apply with a fully loaded brush, roller or mop so the whole surface is wetted
- Leave the surface saturated for about 60 minutes, then remove the excess with a sponge
| Dilution | Ready to use |
|---|---|
| Drying and curing | Full cure in 48 to 72 hours, depending on temperature and humidity |
| Tools | Brush, roller or mop; sponge |
Before you start:
- Wear protective equipment and keep the area ventilated
- Does not protect against strong acids
- Resurface badly deteriorated surfaces first
Directions summarised from the Flagstone Fix technical data sheet. Read the full data sheet (PDF).


