
DREP
DREP Water-Repellent Treatment for Natural Stone
Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.
Description
Faber DREP is a solvent-based, low odour water repellent concentrate for stone and other absorbent surfaces. It penetrates deeply, preserves the material’s natural colour and tone, forms no surface film, keeps the surface breathable and significantly reduces water absorption.
DREP is a solvent-based, deep-penetrating, water-repellent, concentrated, and low-odour treatment that delivers excellent protection for absorbent surfaces. The product preserves the natural colour and tone of the material, does not form a surface film, and maintains the surface’s natural breathability. Its formulation significantly reduces water absorption, preventing moisture-related issues.
Where to use DREP
Natural stone and other absorbent materials where a solvent-based water repellent is preferred but strong odour is a concern.
Key benefits of DREP
- Solvent-based water-repellent protection
- Low odour
- Suitable for natural stone and absorbent materials
- Penetrates deep and keeps the stone breathable
DREP compared with other Faber water-repellent treatments
| Product | Best for |
|---|---|
| HIDRO PROTECTOR MM | Very high performance, water-based; also stain-resistant on polished and compact surfaces |
| PROTEX WB | High performance, water-based; stain-resistant on polished and compact surfaces, including dark honed finishes |
| HIDRO SST | Water-based; ideal for treating all 6 sides of stone tiles without affecting the adhesive bond |
| TX 8 | Concentrated, water-based and VOC-free; diluted on site, 5 L treats over 300 m² |
| DPS | Solvent-based; also protects stone already damaged by humidity and salt efflorescence |
| SOL 170 | Solvent-based; pre-grout treatment, or deep protection against rising damp |
| DREP | Solvent-based and low-odour; for natural stone and absorbent materials |
| LIMESTONE DENSIFIER | Consolidator and honing primer for soft, very porous stones such as limestone |
| CONCRETE HARDENER | Consolidator and honing primer for concrete surfaces |
Not sure which product you need?
Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.
Product information based on Faber Italy technical documentation.
Coverage: about 8–15 m² (86–161 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.
How to use
- Clean surface of dust and dirt; protect adjacent surfaces
- Apply an even, thin coat on clean, dry surface
- After 5-10 minutes, before fully absorbed, redistribute excess with same tool
- On polished/brushed or compact surfaces, rub with clean dry cloth after 10-15 minutes to remove residues
| Coats | One even, thin coat |
|---|---|
| Drying and curing | Dries within 60 minutes; open to traffic after about 2-3 hours |
| Application temperature | +5 to +40°C |
| Tools | Brush, lambswool applicator, roller, cloth |
Before you start:
- Never apply to wet or damp surfaces; not with imminent rain/frost or high humidity
- Test a small unexposed area first
Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).
