Graff Gel

GRAFF GEL

Solvent-based

Product to remove paint, graffiti, permanent ink and polyester grout stains

Category:

Description

GRAFF GEL is a solvent-based product for the removal of paint, permanent inks, synthetic enamels, resins and graffiti. It acts by dissolving the synthetic top layers on a surface, bringing the treated material back into view without changing its appearance.

Thanks to its characteristic gel formula, GRAFF GEL has a particularly thick consistency that makes it easy and effective to use on walls and vertical surfaces.

Downloads

TDS

Areas of Application

Concrete-Marble Agglomerates

Resin-Marble Agglomerates

Resin-Quartz Agglomerates

Slate

Sandstone

Basaltina - Lava Stone

Molted Basalt

Concrete Tiles

Concrete

Craquele Ceramic

Glazed Ceramic

Klinker

Cotto

Granite

Glazed Porcelain Tiles

Honed Porcelain Tiles

Natural or Structured Porcelain Tiles

Structured Porcelain Tiles

Limestone

Marble

Bricks

Manufactured Stone (Eco-stone)

Porphyry

Quartzite

Terracotta

Travertine

Tuff

Videos

Before & After

Before ImageAfter Image

FAQs

Yes. Graff Gel is formulated for a broad range of natural stones—including marble, granite, limestone, sandstone, travertine, slate, and quartzite—as listed under its Areas of Application. Its thick, gel‐based solvent action removes surface coatings without etching or altering the substrate’s inherent appearance.


No. Graff Gel targets and dissolves synthetic residues (paint, inks, enamels, resins) without affecting impregnating sealers embedded within the stone. However, if you have a film‐forming surface sealer, it may soften that top layer ,always test in an inconspicuous spot first.


Apply Graff Gel directly to the affected area, using a brush or spatula to spread an even layer. Allow it to dwell for 5–15 minutes (up to 30 minutes for thicker coatings), then gently agitate or scrape away the softened residue. Wipe clean or rinse the stone and dry the surface thoroughly.


Keep Graff Gel in its original, tightly sealed container, stored upright in a cool, dry place away from direct sunlight and heat sources. Refer to the product’s Technical Data Sheet (TDS) for specific shelf-life and handling recommendations.


During application, Graff Gel releases solvent vapors; keep pets and children out of the area until the product is fully removed and the surface has dried. After cleaning and sufficient ventilation, no harmful residues remain on the stone.


Yes. Its solvent‐based formula works effectively on both interior and exterior substrates—from indoor countertops and walls to outdoor paving—provided you ensure adequate ventilation indoors and protect surrounding vegetation or finishes outdoors.