HIDROFAB
Water-based, dirt-proof protective wax polish with polished finish, for stone, cotto, or concrete floors.
Description
HIDROFAB is a water-based wax-resin emulsion to use as a self-polishing, finishing treatment for floors in natural stone, cotto, terracotta, parquet, natural wood, or concrete. The product seals the textured surface, creating a dirt-proof layer and making daily cleaning and maintenance operations on the floor much easier.
Treatment with HIDROFAB leaves the surface with a polished finish and slightly enhances the original colour tone of the material.
Downloads
Areas of Application
Concrete-Marble Agglomerates
Slate
Sandstone
Basaltina - Lava Stone
Concrete Tiles
Concrete
Cotto
Granite
Natural or Structured Porcelain Tiles
Limestone
Marble
Quartzite
Terracotta
Travertine
Videos
FAQs
What is HIDROFAB used for?
HIDROFAB is a water-based wax-resin emulsion used for treating floors made of natural stone, cotto, terracotta, concrete, and even natural wood.
Does HIDROFAB provide any protection to floors?
Yes, HIDROFAB creates a dirt-proof layer on the surface, making daily cleaning and maintenance much easier and preventing dirt build-up.
Will HIDROFAB change the color of my floor?
HIDROFAB slightly enhances the original color tone of the material while giving the surface a polished finish.
Is HIDROFAB safe for use on outdoor surfaces?
HIDROFAB is designed for use on both indoor and outdoor surfaces, but make sure to apply it in well-ventilated areas for optimal results.
How do I apply HIDROFAB to my floors?
Apply HIDROFAB with a clean cloth or applicator, evenly spreading it over the surface. Allow it to dry and polish for a high-quality finish.
How long does it take for HIDROFAB to dry?
After application, HIDROFAB’s film is dry to the touch in 1–2 hours.
You can resume normal foot traffic and furniture placement after about 4–6 hours from when you applied it.
Can HIDROFAB be removed if needed?
Yes. Because HIDROFAB is a wax-resin finish, you strip it off just like other wax treatments—using a Faber wax-stripper product. For instance:
COTTOSOLV (a concentrated alkaline degreaser) is specifically recommended for stripping wax, resin, polymers and previous treatments.
You can also use DEC 21 (solvent-based wax stripper) for deep “double-wax” removal.
Follow the stripper’s instructions: apply, agitate, then rinse clean to fully remove the HIDROFAB layer.
What is the shelf life of HIDROFAB?
HIDROFAB remains fully effective for up to 24 months when kept in its original, tightly sealed container and stored in a cool, dry place away from direct sunlight or frost. For precise storage recommendations and shelf-life confirmation, please refer to the product’s Technical Data Sheet.