
LIQUID WAX
Polish for Stone, Marble, Granite & Natural Stone
Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.
Switching from Roff Cera Fluida? This is our closest match for the same job. Compare Akemi and Roff alternatives
Description
Faber LIQUID WAX is a solvent-based liquid polishing wax for natural stone that enhances colour and brightness and can be applied along edges and surface irregularities.
LIQUID WAX is a solvent-based fast-drying wax to polish and enhance the color of natural stone surfaces. It can be easily applied also along edges and surface irregularities.
The use of LIQUID WAX enhances the shade and brightness of the treated material. The product provides water and stain-resistant properties making daily maintenance operations easier.
Where to use LIQUID WAX
Natural stone surfaces that need a polished, enhanced finish.
Key benefits of LIQUID WAX
- Polishes and enhances natural stone
- Liquid format for easy application
LIQUID WAX compared with other Faber waxes and care products
| Product | Best for |
|---|---|
| LIQUID WAX | Polishing and enhancing liquid wax for natural stone |
| SOLID WAX | Polishing and enhancing solid wax for natural stone |
| HIDROFAB | Water-based liquid wax with a polished finish for cotto, stone, concrete and ceramic floors |
| TOP CARE | Maintenance cream that boosts gloss and brightness on stone worktops |
Not sure which product you need?
Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.
Product information based on Faber Italy technical documentation.
Coverage: about 15–25 m² (161–269 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.
Guide: for how and when to use it, read our granite polish guide.
How to use
- Clean thoroughly; protect areas not to be treated (surface can be heated to aid penetration)
- Test on an unexposed area
- Apply a thin, even layer to the clean, dry surface
- After 5-10 minutes, once dry, polish in circular motions until residues are gone and shine is even
| Coats | one thin, even layer |
|---|---|
| Drying and curing | dries within 5-10 minutes |
| Tools | lambswool applicator, roller, cloth; white pad by hand, or single-disc machine/hand polisher with white pad |
Before you start:
- Do not apply on wet or humid surfaces
- Test a small, unexposed area first
Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).
