
AS 930 CP
AS 930 CP Food-Safe Stain-Proof Sealer for Marble, Travertine & Limestone Countertops
Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.
See it in action
Description
Faber AS 930 CP is a solvent-based acid etch protection for countertops and tabletops that also protects against staining agents, with a polished finish. It is certified safe for surfaces that come into contact with food.
AS 930 CP is a solvent-based, protective treatment against staining agents and acid etching with a polished finish. The product has been formulated to be applied on tabletops and countertops.
AS 930 CP is certified safe to be used on surfaces that get in contact with food.
Where to use AS 930 CP
Tables, kitchen countertops and bathroom tops in marble, travertine, limestone and other acid-sensitive materials, where both stains and acid etching are a risk. Not for use on floors.
Key benefits of AS 930 CP
- Stain-resistant and etch (acid) resistant
- Polished finish that enhances the natural beauty of the stone
- Safe for food contact
- Scratch resistance can be maintained with CP 5
AS 930 CP compared with other Faber countertop protection
| Product | Best for |
|---|---|
| AS 930 CP | Stain- and etch-resistant protection with a polished finish for tables, kitchen and bathroom tops |
| CP 5 | Scratch-resistant maintenance treatment for surfaces treated with AS 930 CP |
Not sure which product you need?
Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.
Product information based on Faber Italy technical documentation.
Coverage: about 15–20 m² (161–215 sq ft) per kg per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.
Guide: for how and when to use it, read our marble sealer guide.
How to use
- Clean thoroughly, protect nearby surfaces; test on an unexposed area
- Shake well and drizzle onto the surface
- Spread an even, continuous coat with a lambswool applicator and/or melamine pad without letting it dry during application
- On large areas work in sections, each within 5 minutes; let it self-level without further handling
- Dries in 1-2 hours; resume use after 24 hours
| Drying and curing | dries in 1-2 hours; maximum protection and use after 24 hours |
|---|---|
| Tools | lambswool applicator and/or melamine sponge/pad |
Before you start:
- Do not apply to dirty, wet or heated surfaces, or to floors
- Flammable (flash point 17°C); test on an unexposed area first
Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).
