
DEEP ENHANCER
Deep Enhancer Wet-Look Color Enhancer
Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.
See it in action
Description
Faber DEEP ENHANCER is a solvent-based colour enhancer for porcelain tiles and quartz agglomerates and other ultra-compact surfaces with minimal absorption. The impregnating, stain-proof wet-look treatment revives colour with a matt finish and no surface film.
DEEP ENHANCER is a solvent-based, impregnating, color-enhancing, stain-proof, and wet-look non-filming protective treatment to revive ultra-compact surfaces characterized by minimum absorption capacity.
DEEP ENHANCER enhances the colour of compact materials such as ceramic, porcelain tiles and quartz agglomerates providing a matt finish without creating a film on the surface.
Where to use DEEP ENHANCER
Low-absorbency natural stone and quartz agglomerates (engineered stone), including polished marble, travertine, limestone and granite.
Key benefits of DEEP ENHANCER
- Enhances tone and colour with a matt wet-look effect
- Suitable for low-absorbency stone and quartz agglomerates
- Protects against water- and oil-based stains
- Also available in a BLACK version for black surfaces
DEEP ENHANCER compared with other Faber colour-enhancing stain protectors
| Product | Best for |
|---|---|
| MA 90 | Solvent-based, for medium to medium-high absorbency stone; satin wet-look |
| MA 90/V | Solvent-based, for medium-high to highly absorbent stone; deeper, glossier wet-look |
| P147 | Solvent-based, for medium to medium-high absorbency stone; matt wet-look |
| P 147 BLACK | P147 formulated specifically for black-coloured surfaces |
| WET LOOK ECO | Water-based; for materials with medium-high absorption; satin or matt wet-look, no surface patina |
| DEEP ENHANCER | Solvent-based, for low-absorbency stone and quartz agglomerates; matt wet-look |
| DEEP ENHANCER BLACK | DEEP ENHANCER formulated specifically for black-coloured surfaces |
Not sure which product you need?
Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.
Product information based on Faber Italy technical documentation.
Coverage: about 20–30 m² (215–323 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.
How to use
- Clean surface, protect adjacent surfaces; surface must be dry
- Run a preliminary test on an unexposed area
- Apply a single even layer over the whole area
- After 5-10 min redistribute excess with same tool
- After 20-30 min (up to 45-60 min for deeper penetration) remove all residues, buffing dry with floor polisher and white/lambswool pad or cloth
| Coats | one coat |
|---|---|
| Drying and curing | dries within 1-2 hours; resume use after 4-6 hours |
| Application temperature | +5 to +40°C (instructions say +5 to +35°C) |
| Tools | brush, lambswool applicator, roller, cloth; floor polisher with white/lambswool pad for residues |
Before you start:
- Never apply to wet or damp surfaces
- Do not apply on overly heated surfaces or if rain/frost is imminent
Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).
