Faded Black Granite or Marble? How to Restore a Deep, Even Black
Black granite or marble looking grey and patchy? How a black-pigmented, stain-proof impregnator brings back a deep, uniform black.

Black stone makes a strong statement: black granite kitchen counters, black marble at a building entrance, black quartz vanity tops and dark porcelain floors. When it fades, it shows. Wear, harsh cleaners and age can leave black stone looking grey, blotchy or crazed with fine light lines, and every watermark stands out. In many cases you can restore faded black granite and other black stone without replacing it.
This guide is for homeowners, stone fabricators and facility managers who want their black surfaces to look black again. It explains how to use Faber Deep Enhancer Black, a black-pigmented, stain-proof impregnator made for compact, low-absorption materials.

What Faber Deep Enhancer Black is (and when to use it)
Faber Deep Enhancer Black is a solvent-based impregnator with black pigmentation, developed for the most compact, least absorbent surfaces. According to its technical data sheet, its high-quality pigments give a full, deep, uniform and long-lasting black without forming a film on the surface. It:
- strongly enhances colour without a greasy patina;
- covers small defects or crackling that spoil the evenness of black materials;
- gives high stain resistance, with water and oil repellency;
- lets vapour pass through, so the stone can breathe;
- resists UV rays and does not yellow;
- works indoors and outdoors.
Suitable surfaces: black materials only, including black marble, polished and brushed travertine and granite, quartz agglomerates and porcelain stoneware.
When not to use it: on anything that is not black. For compact surfaces in other colours, the clear Faber Deep Enhancer is the right choice.
What you need
- Faber Deep Enhancer Black (1 litre bottles or 5 litre containers)
- Applicator: brush, sponge, lambswool applicator, roller, cloth or sprayer
- For removing residue: a scrubbing brush, or a single-disc machine with a cotton cloth or blotting paper
- Masking tape to protect grout, sinks, walls and adjacent light-coloured surfaces
- White spirit for cleaning tools
- Solvent-resistant gloves, eye protection and a mask suitable for solvent vapour
Step-by-step: how to restore faded black granite
- Test a small area first to confirm suitability and the final colour.
- Clean and dry the surface. Never apply to wet or overheated surfaces.
- Mask carefully. The black pigment can mark light grout, sanitaryware or neighbouring stone.
- Use it undiluted. Apply with a brush, sponge or sprayer. Coverage is 20 to 30 m2 per litre.
- Wait 10 to 15 minutes, depending on how absorbent the material is, for the solvent to evaporate.
- Remove the residue with a scrubbing brush, or with a single-disc machine and a cotton cloth or blotting paper.
- Keep going until the surface is dry, even to the touch, removing all excess product as the data sheet instructs.
- Second coat, if needed. On more absorbent material, wait until the first coat has dried, at least 30 minutes, before applying a second.
- Wait at least 4 to 6 hours after removing the residue before reopening the area to foot traffic.
Tips and common mistakes
- Do not leave excess on the surface. Thorough residue removal is what keeps the finish even and film-free.
- Work in manageable sections so you can remove residue within the 10 to 15 minute window.
- Avoid applying in direct sun or on hot stone, such as an outdoor black granite step at midday.
- Deep scratches or etching on polished black stone may need professional honing and polishing before the enhancer.
- For routine cleaning, use a neutral cleaner and avoid harsh acidic products.
Safety and storage
Faber Deep Enhancer Black is solvent-based, with a mineral-spirit odour and a flash point of 30°C. Its data sheet lists these hazards: highly flammable liquid and vapour; may be fatal if swallowed and enters airways; may cause drowsiness or dizziness; repeated exposure may cause skin dryness or cracking.
- Keep away from heat, sparks, open flames and hot surfaces. No smoking, and turn off gas stoves when treating kitchen counters.
- Avoid breathing the vapour. Ventilate well and wear solvent-resistant gloves, eye protection and a suitable mask.
- If on skin or hair, remove contaminated clothing and rinse with water or shower. If swallowed, do not induce vomiting; get medical help.
- Clean tools with white spirit.
- Keep the container tightly closed in a cool, dry place, out of reach of children. Shelf life is 36 months in the original sealed pack.
Frequently asked questions
Can I use Faber Deep Enhancer Black on light-coloured stone?
No. It contains black pigment and is intended for black materials only. For other colours of compact stone, porcelain or quartz, use the clear Faber Deep Enhancer instead.
Will it leave a shiny or greasy film?
It is designed not to form a film on the surface and to enhance colour without a greasy patina, provided all excess is removed until the surface is dry to the touch.
How long before I can walk on the treated floor?
After carefully removing the residue, wait at least 4 to 6 hours before reopening the area to foot traffic.
Need help?
Order Faber Deep Enhancer Black from Flagstone Fix to restore faded black granite, marble or quartz yourself. If you would rather have it done professionally, our Colour Enhancer Application team can restore and protect black surfaces at your home or site. WhatsApp +91 87792 40420 with a photo.

Faber Deep Enhancer Black
Faber Deep Enhancer

