DPS

DPS Water-Repellent Treatment for Natural Stone

Price & buy on zyax.in Ask about this product on WhatsApp

Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.

See it in action

DPS: deep penetrating sealer for stoneDeep penetrating sealer that protects stone surfaces from water and the elements.

Not sure it suits your stone? Send us a photo on WhatsApp

Description

Faber DPS is a solvent-based water repellent for stone with efflorescence and other humidity-related problems such as salt, rust and oxidation. It penetrates the material by several millimetres, so its water-repellent protection survives later grinding or polishing.

DPS is an innovative solvent-based treatment that provides great water-repellent features. DPS can be used even on surfaces that are already afflicted by humidity-related issues, like salt and efflorescences, rust, and oxidations.

Thanks to its innovative formulation, DPS can penetrate the material for several millimeters. For this reason, it gives the water-repellent protection even in case the surface will be subjected to grinding/polishing procedure.

Where to use DPS

Natural stone including marble, travertine, limestone, granite, quartzite, sandstone, basalt, lava stone and agglomerates, on polished, light honed and rough finishes. Suitable for surfaces that are already installed, and for low-absorbency stone.

Key benefits of DPS

  • Also protects stone already damaged by humidity and salt efflorescence
  • Honing or repolishing the surface does not remove the protection
  • Suitable for already-installed surfaces
  • Works even on low-absorbency natural stone

DPS compared with other Faber water-repellent treatments

ProductBest for
HIDRO PROTECTOR MMVery high performance, water-based; also stain-resistant on polished and compact surfaces
PROTEX WBHigh performance, water-based; stain-resistant on polished and compact surfaces, including dark honed finishes
HIDRO SSTWater-based; ideal for treating all 6 sides of stone tiles without affecting the adhesive bond
TX 8Concentrated, water-based and VOC-free; diluted on site, 5 L treats over 300 m²
DPSSolvent-based; also protects stone already damaged by humidity and salt efflorescence
SOL 170Solvent-based; pre-grout treatment, or deep protection against rising damp
DREPSolvent-based and low-odour; for natural stone and absorbent materials
LIMESTONE DENSIFIERConsolidator and honing primer for soft, very porous stones such as limestone
CONCRETE HARDENERConsolidator and honing primer for concrete surfaces

Not sure which product you need?

Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.

Product information based on Faber Italy technical documentation.

Coverage: about 10–15 m² (108–161 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.

How to use

  1. Clean surface of dust and dirt; protect adjacent surfaces
  2. Test on a small unexposed area first
  3. Apply an even, abundant coat to clean, dry surface
  4. On very absorbent material apply a second coat wet on wet
  5. Wait 10-15 minutes for penetration, then remove residues with a clean cloth
CoatsOne; second coat wet on wet on very absorbent material
Drying and curingDries within 1 hour; open to foot traffic about 4 hours after application
Application temperature+5 to +35°C
ToolsBrush, lambswool applicator, roller, cloth

Before you start:

  • Never apply to wet or damp surfaces
  • Do not apply when rain or frost is imminent, or in fog/high humidity

Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).

Helpful guides for DPS

Chat with us