PROTEX WB

Eco-friendly, water-based, easy to apply impregnating sealer to protect natural stone against rising damp.

Price & buy on zyax.in Ask about this product on WhatsApp

Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.

Description

Faber PROTEX WB is a 100% water-based, VOC-free water-based stone sealer for rising damp that protects natural stone against staining and water. It penetrates deep for strong, lasting protection without a film, keeping the surface’s breathability and appearance.

PROTEX WB is a high-performance impregnating treatment to protect natural stone against staining and the harmful effects of water and rising damp. It is characterized by a 100% water-based, eco-friendly formula and for its lack of volatile organic compounds (V.O.C. Free), therefore, its use is not harmful to the environment or for the health of users, either during or after application.

The specific characteristic of PROTEX WB is that of penetrating natural stone deep down, guaranteeing strong, lasting protection without compromising the original breathability of the surface, since it does not create any type of film or alter the original appearance of the material.

Where to use PROTEX WB

Natural stone including marble, travertine, limestone, granite, quartzite, sandstone, basalt, lava stone and agglomerates. Suitable for polished finishes, honed finishes in both light and dark colours, and rough finishes such as sand-blasted, bush-hammered and tumbled stone.

Key benefits of PROTEX WB

  • High water-repellent performance
  • Water-based
  • Stain-resistant on polished and compact surfaces
  • One of the few options recommended for dark honed stone

PROTEX WB compared with other Faber water-repellent treatments

ProductBest for
HIDRO PROTECTOR MMVery high performance, water-based; also stain-resistant on polished and compact surfaces
PROTEX WBHigh performance, water-based; stain-resistant on polished and compact surfaces, including dark honed finishes
HIDRO SSTWater-based; ideal for treating all 6 sides of stone tiles without affecting the adhesive bond
TX 8Concentrated, water-based and VOC-free; diluted on site, 5 L treats over 300 m²
DPSSolvent-based; also protects stone already damaged by humidity and salt efflorescence
SOL 170Solvent-based; pre-grout treatment, or deep protection against rising damp
DREPSolvent-based and low-odour; for natural stone and absorbent materials
LIMESTONE DENSIFIERConsolidator and honing primer for soft, very porous stones such as limestone
CONCRETE HARDENERConsolidator and honing primer for concrete surfaces

Not sure which product you need?

Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.

Product information based on Faber Italy technical documentation.

Coverage: about 10–15 m² (108–161 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.

Guide: for how and when to use it, read our granite sealer guide.

How to use

  1. Clean surface, protect adjacent areas; surface as dry as possible
  2. Run a preliminary test on an unexposed area
  3. Pre-installation: apply an even layer on top then edges; after 5-10 min spread residue with roller/lambswool/brush
  4. After 1-2 h drying, treat the underside the same way
  5. Once dry remove residue with white pad or damp cloth; wait at least 24 h before laying
  6. Post-installation: apply even coat, level residue after 5-10 min, remove with white pad/damp cloth; second layer on highly absorbent surfaces
Dilutionready to use, no dilution
Coatsone coat; second on highly absorbent surfaces
Drying and curing1-2 h between sides; at least 24 h before laying; fully dry in about 24 h (protect from water/moisture)
Application temperature+5 to +40°C
Toolsimmersion, lambswool applicator, roller, cloth, brush; white pad or single-disc machine for residue

Before you start:

  • Never apply to a wet surface
  • Uneven application leaves residue hard to remove

Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).

Helpful guides for PROTEX WB

Chat with us