WS 800

WS 800 Low-Odour Water-Repellent Treatment for Natural Stone

Price & buy on zyax.in Ask about this product on WhatsApp

Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.

Description

Faber WS 800 is a low odour solvent-based water repellent for stone that gives excellent water repellency without altering colour or appearance. It forms no surface film, stays breathable, significantly reduces water absorption and can be used as a water-resistant pre-treatment before a stain-resistant treatment.

WS 800 is a solvent-based, low-odour, water-resistant treatment that provides excellent water repellency without altering the colour or appearance of the material. It does not create a surface film, preserving the natural breathability of the treated substrate. WS 800 significantly reduces water absorption, preventing humidity-related issues, and can also be used as a water-resistant pre-treatment before applying a surface stain-resistant treatment.

Coverage: about 8–15 m² (86–161 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.

How to use

  1. Clean surface thoroughly, removing all dust and dirt; protect areas not to be treated
  2. Test on an unexposed area or unused piece first
  3. Apply a thin, even layer on clean, dry surface covering the whole surface
  4. After 5-10 minutes, before it dries completely, even out residues with the same tool
  5. On polished/compact materials, spread residues with a clean dry cotton cloth until fully absorbed
Drying and curingDries within 60 minutes; resume use after 2-3 hours
Application temperature+5 to +40°C
ToolsLambswool applicator, roller, cloth

Before you start:

  • Do not apply on wet or humid surfaces
  • Do not apply to overly heated surfaces

Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).

Helpful guides for WS 800

Chat with us