Monsoon-Proofing a Stone Balcony Floor With a Water Repellent
Balcony and terrace stone soaks up monsoon rain and stays damp. How a breathable, colourless water repellent reduces absorption.

Balconies, terraces and verandahs get the worst of the Indian monsoon. Stone and terracotta floors soak up rain, stay dark and damp for days, and slowly pick up dirt and humidity-related problems. Once the rains end, the floor rarely looks the same as it did. A water repellent for stone balconies is one of the simplest ways to fight back.
Reducing how much water the stone absorbs is the first line of defence. This guide is for homeowners, housing societies and contractors who want to protect exposed stone floors before the rains. We use Faber WS 800, a low-odour water-resistant treatment that leaves the stone looking natural.

What Faber WS 800 is (and when to use it)
Faber WS 800 is a solvent-based, low-odour, deep-penetrating water-resistant treatment for natural stone and absorbent materials. It gives strong water repellency without changing the colour of the material. It does not create a film, so the surface keeps breathing, and it drastically reduces the stone’s ability to absorb water, avoiding humidity-related issues.
It is fast drying, does not yellow over time and is suitable indoors and outdoors. It can also be used as a water-resistant pre-treatment before a surface stain-resistant treatment.
Listed surfaces include granite, marble, limestone, sandstone, slate, travertine, quartzite, porphyry, basaltina, molten basalt, terracotta, clinker, concrete, concrete tiles, facing brick, glazed and crackled ceramic and reconstructed stone.
When not to use it: on wet or humid surfaces, on overheated surfaces, or on new floors before the adhesive and grout have cured. It is a treatment for the stone itself, not a substitute for a failed waterproofing membrane under the balcony.
What you need
- Faber WS 800 (1 litre or 5 litre)
- Lambswool applicator, roller or cloth
- Clean, dry cotton cloths for polished or compact stone
- Masking tape for walls, railings, door frames and drains
- White spirit for cleaning tools
- Solvent-resistant gloves, eye protection and a suitable mask
Step-by-step: How to apply a water repellent for stone balconies
- Pick a dry spell. Treat the balcony before the monsoon, or after several dry days, so the stone is dry right through.
- Clean thoroughly. Remove all dust and dirt. Let the floor dry completely; never apply on wet or humid stone.
- Check temperature. The surface must be between +5 and +40°C and not overheated. On a sunny balcony, work early in the morning or in the evening.
- Protect surroundings. Mask walls, railings, door frames and plants.
- Test. Treat a small corner and check the look once dry.
- Apply a thin, even layer. Use a lambswool applicator, roller or cloth to cover the whole floor. Coverage is about 8 to 15 m² per litre.
- Even out after 5 to 10 minutes. Before the product dries completely, spread residues with the same tool. The surface should end up looking even and dry.
- Deal with residues on dense stone. On polished or compact materials, residues can be more visible. Spread them with a clean, dry cotton cloth until fully absorbed.
- Dry and reopen. Faber WS 800 dries within 60 minutes. Resume use of the balcony after 2 to 3 hours. Clean tools with white spirit.
Tips and common mistakes
- Don’t forget the edges, skirting line and the area around the drain outlet, where water sits longest.
- Coverage on the data sheet is 8 to 15 m² per litre. Use your test patch to judge where your stone falls in that range before you order.
- Want stain protection too? Use Faber WS 800 as the base coat, let it dry completely, then apply a surface stain protector such as Faber Guard-S.
- Fix cracked tiles and open joints first. A water repellent protects the stone; it doesn’t seal gaps.
- For care afterwards the data sheet suggests Faber Neugel or Faber Algafloor for daily cleaning and FABER 30 or Faber Deterfug for heavy-duty cleaning.
Safety and storage
- Faber WS 800 is solvent-based with a flash point of 30°C, so it is flammable. Keep away from flames, sparks and heat. No smoking.
- Wear suitable PPE and follow the product safety data sheet. Even on an open balcony, avoid breathing vapours.
- Keep children and pets indoors until the floor is dry.
- Store tightly closed in a cool, dry place. Shelf life is 36 months in the original sealed packaging.
Frequently asked questions
Will Faber WS 800 change how my balcony floor looks?
No. It provides water repellency without changing the colour of the stone, and it does not create a film on the surface, so the stone keeps its natural look.
Can I apply a stain protector on top of Faber WS 800?
Yes. The data sheet says it can be used as a water-resistant pre-treatment before a surface stain-resistant treatment. Let it dry completely first.
How soon can we use the balcony again?
Faber WS 800 dries within 60 minutes, and you can resume use of the surface after 2 to 3 hours.
Need help?
Buy Faber WS 800, a water repellent for stone balconies, terraces and verandahs, from Flagstone Fix, or let our team protect your balcony or terrace with our Stone Sealing service. WhatsApp +91 87792 40420 before the rains to book.

Faber WS 800
Faber Guard-S

