DECERA/P
Decera/P Alkaline Wax Stripper
Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.
Downloads
Switching from Akemi Stone Cleaner? This is our closest match for the same job. Compare Akemi and Roff alternatives
Description
Faber DECERA/P is a concentrated alkaline degreaser for wax stripping. It removes greasy dirt, waxes, resins, polymers and old surface treatments, and lifts salt efflorescence from acid-sensitive stone such as marble.
DECERA/P is a concentrated alkaline cleaner highly effective against greasy dirt, organic stains, residues, polymers, waxes, resins, and surface treatments. The product is also suitable for removing salt efflorescence from acid-sensitive materials such as marble and can be used in combination with DEC 21 to perform a double wax-stripping process.
Where to use DECERA/P
All materials, when old waxes, previous treatments or organic polymers need to be removed before re-treating.
Key benefits of DECERA/P
- Concentrated alkaline stripper
- Removes aged waxes, treatments and polymers
- Suitable for all materials
DECERA/P compared with other Faber cleaners
| Product | Best for |
|---|---|
| NEUGEL | Neutral daily cleaner for absorbent surfaces: natural stone, concrete, cotto, terracotta |
| ALGAFLOOR | Neutral daily cleaner for compact surfaces: ceramic, porcelain, agglomerates |
| FABER SOAP | Neutral cleaner with water-repellent action for polished stone; ideal after polishing |
| FABER 30 | Alkaline, extractive deep cleaner for high foot traffic dirt; all materials |
| COTTOSOLV | Alkaline cleaner for greasy dirt, oxidation, efflorescence, algae and mould; all materials |
| DETERFUG | Acidic deep cleaner for surface patina, even on textured surfaces; acid-resistant materials only |
| DISYCOTT | Acid cleaner for cement, grout and adhesive residues, paint and limescale; acid-resistant surfaces only |
| EPOXY RESIDUE REMOVER | Ready-to-use alkaline cleaner for epoxy grout and adhesive residues; all surfaces |
| DECERA/P | Alkaline stripper for old waxes, treatments and polymers; all materials |
| DEC 21 | Solvent stripper for old waxes and treatments; can be paired with an alkaline stripper for double stripping |
Not sure which product you need?
Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.
Product information based on Faber Italy technical documentation.
Coverage: about 10–15 m² (108–161 sq ft) per litre, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.
How to use
- Apply undiluted or diluted with single-disc machine or large brush
- Leave to work about 10-15 minutes, agitating at regular intervals
- Add clean water to form an emulsion, remove excess (ideally liquid vacuum)
- Rinse thoroughly; repeat if results unsatisfactory
- Reopen as soon as dry
| Dilution | 50% (double wax stripping / stubborn resin-wax; undiluted on absorbent cotto/concrete); 20-30% in water (strong degreasing, worksite cleaning); 10% i.e. 1:9 (periodic degreasing) |
|---|---|
| Drying and curing | Reopen as soon as dry; wait until completely dry through before reapplying treatments |
| Application temperature | Not on overheated surfaces |
| Tools | Single-disc machine (green discs for wax stripping) or large brush; white pad; liquid vacuum |
Before you start:
- Test on an unexposed area or unused piece first
- Do not apply to wet or overheated surfaces; do not mix with chemicals other than DEC 21
Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).