FS POWER SHINE LIQUID
Polishing Cream for Marble and Calcareous Stone Surfaces
Description
FS POWER SHINE LIQUID is a ready-to-use cream designed for polishing and restoring calcareous stones. It effectively restores surfaces to a factory-finish shine, removes minor scratches and stains, and provides a high level of polish with minimal equipment required.
Downloads
Areas of Application
Calcareous Stone
FAQs
What is FS POWER SHINE LIQUID used for?
FS POWER SHINE LIQUID is a ready-to-use polishing and restoration cream for calcareous stones. It restores surfaces to a factory-finish shine, removes minor scratches and stains, and delivers a high level of polish with minimal equipment.
How should the surface be prepared before using this polishing cream for marble?
Ensure the surface is clean and free from dust, debris, oil, or other loose particles, then rinse thoroughly with water and air dry. Remove wax, epoxy, or any coatings before application, and severely worn or damaged surfaces should be resurfaced prior to polishing.
What is the correct application method for FS POWER SHINE LIQUID?
Perform a patch test and protect surrounding areas, then shake the bottle well, dampen the surface, and apply approximately 30 ml per 15 sq. ft. Add water to form a slurry and polish with a low-speed machine and pad, making 4–5 passes or as required for the stone.
How can I prevent staining after polishing with this marble polishing cream?
Avoid contact of the polished surface with the slurry again to prevent staining. Follow the rinse and drying steps after buffing to minimize the chance of slurry contact.
What coverage can I expect from FS POWER SHINE LIQUID?
Coverage is approximately 1000–1200 sq. ft. per bottle, though actual coverage may vary depending on surface type and application.