Marble Polish Guide: Which Liquid, Cream or Powder to Buy

Which marble polish to buy: polishing creams for dull home floors, crystallisers for high-traffic areas, powders for re-polishing after grinding, and universal creams for mixed floors.

The right marble polish depends on how dull the floor is. If the marble has only lost its gloss from foot traffic, a polishing cream or a crystalliser buffed on with a pad brings the shine back in an afternoon. If it is scratched, etched or worn rough, no liquid will fix it: the floor needs diamond grinding first, then a polishing powder to finish. Buying the wrong type is the most common reason marble polish “doesn’t work”.

This guide explains the four kinds of marble polish sold in India, which one suits your floor, and how to apply each. It is written by Flagstone Fix, the stone-care brand of Zyax Chem Pvt Ltd and an authorised partner of Faber Italy Tile & Stone Care. You can see every product mentioned in our marble polish range.

Quick answer: which marble polish should you buy?

Your floorType of polishProducts
Lost its shine, no deep scratches (home use)Polishing cream / liquidFlagstone Fix Power Shine Liquid, Flagstone Fix Power Shine Liquid Plus
Dull from heavy traffic (hotels, offices, lobbies)Liquid crystalliser, spray buffedFaber Cristalfab, Faber FK2, Faber Buff N Shine
Scratched or etched, being re-polished by machinePolishing powderFlagstone Fix Power Shine Powder, Faber A3 Yellow
Mixed floor: marble with granite, quartz or inlayUniversal polishing cream / fluidFaber Universal Glossy, Faber Alpha Gloss
Granite, not marbleGranite polishing creamFaber Star Shine

First, check what your marble actually needs

Marble is a calcareous (calcium-based) stone. Its shine comes from a very smooth surface, so anything that roughens that surface makes it look dull. Before buying, look at the floor in low, side-on light:

  • Hazy, dull, but smooth to the touch. The gloss has worn away from foot traffic and cleaning. A polishing cream or crystalliser will restore it.
  • Fine surface scratches and scuff marks. A cream such as Flagstone Fix Power Shine Liquid removes minor scratches; a crystalliser also raises scratch resistance afterwards.
  • Dull rings or spots where something spilled. This is etching from acids such as lemon, vinegar, cola or toilet cleaner. Light etch marks can be polished out; deep ones need honing first.
  • Deep scratches, lippage between tiles, a rough or pitted surface. The floor needs mechanical grinding with diamond pads, then polishing powder. See what you can fix yourself and when to call a professional.
  • Yellowing on white marble. Polish will not remove it. That is a stain problem; see why white Italian marble turns yellow.

Also make sure the floor is clean before polishing. Polish buffed over dirt locks the dirt in. Use an acid-free cleaner from our marble cleaners range first.

The four types of marble polish

1. Polishing creams and liquids: the easiest option for homes

Ready-to-use creams are applied in small amounts and buffed to a shine. Flagstone Fix Power Shine Liquid is a marble polishing cream that restores a factory-finish shine to calcareous stone, removes minor scratches and stains, and needs minimal equipment. Flagstone Fix Power Shine Liquid Plus is a vitrifying liquid that gives a brilliant shine, improves resistance to scuffs and scratches, and dries as you buff, so there is no messy clean-up.

Best for: homeowners and small areas such as a living room, staircase or tabletop. Note: always patch test first; black, green and some white marbles can respond differently.

2. Liquid crystallisers: the professional maintenance choice

Crystallisers react with the surface of lime-based stone to harden it and restore gloss. They are sprayed on and buffed with a single-disc machine (the “spray buffing” method). Faber Cristalfab and Faber FK2 are ready-to-use, water-based crystallisers for marble, travertine and limestone indoors; both restore the shine of the surface without yellowing or greying, without layering defects and without an orange peel effect. Faber Buff N Shine is an acid-free, water-based crystalliser applied dry with a white pad for a quick result on floors that were polished before.

Best for: hotels, malls, offices and large homes that want to keep marble glossy month after month. For the method step by step, read our guide to spray buffing marble floors, and for the difference between the two treatments, marble crystallisation vs polishing.

3. Polishing powders: for re-polishing after grinding

Powders are mixed with water into a slurry and worked in with a single-disc machine. They are the final step of a full restoration, after diamond grinding has removed scratches. Flagstone Fix Power Shine Powder is applied after the 3000-grit diamond stage and uses crystalliser technology to give a high wet-look shine in significantly less time than conventional polishing. Faber A3 Yellow is a professional wet polishing powder for a glass-effect finish on marble, limestone and travertine, working directly with the stone without wax or coatings.

Best for: stone restoration contractors and marble polishing services. Not for granite or other non-calcareous stone. If the marble is soft and scratches easily, consider hardening it before polishing.

Search for “marble polish powder” online and you will see a lot of cheap oxalic-acid powders. Those etch a shine into the surface and can leave marble patchy if the job is not done carefully, so for a lasting finish, use a powder made for the job and test a corner first.

4. Universal creams and fluids: for mixed-material floors

Many Indian floors combine marble with granite borders, quartz or inlay work. A marble-only product can leave the other materials dull. Faber Universal Glossy is a ready-to-use, water-based cream that polishes marble, granite, quartz and concrete in one go with a uniform shine. Faber Alpha Gloss is a water-based polishing fluid for marble, granite, travertine, limestone, terrazzo and agglomerates. More on polishing inlay floors.

Polishing granite on its own? Faber Star Shine is a water-based granite polishing cream that seals the porosity of the material and gives a sharp shine; see how to bring back the shine on a granite floor. For polished porcelain tiles, use Faber Star Shine Easy.

How to polish a marble floor with a cream

  1. Clean. Wash the floor with a neutral, acid-free marble cleaner and let it dry fully.
  2. Patch test. Try the polish on a hidden spot and check the result before doing the whole floor.
  3. Apply a little. Spread a small amount of polish over about one square metre at a time. More product does not mean more shine.
  4. Buff. Buff with a white pad on a single-disc machine (or a soft cloth for small areas) until the surface is dry and glossy.
  5. Wipe off residue and move to the next section, overlapping slightly.
  6. Let it cure before heavy foot traffic, and keep acidic cleaners off the floor from then on.

For crystallisers and powders, follow the product’s own instructions; both are normally machine-applied and are best handled by a trained operator.

How to keep the shine longer

  • Mop with a pH-neutral cleaner, never with vinegar, lemon or acidic “all-floor” liquids.
  • Put mats at entrances: grit carried in on shoes acts like sandpaper on polished marble.
  • Wipe spills of juice, tea, wine or cola quickly so they cannot etch.
  • Seal the marble after polishing so stains stay on the surface. See how to seal marble flooring.
  • Re-buff high-traffic areas with a crystalliser or cream before the floor goes fully dull, rather than waiting for a full restoration.

Related guides: for the machine stage, see our marble polish powder guide; for scratched or uneven floors, see diamond marble polishing.

Frequently Asked Questions

Which is the best marble polish for home use?

For most homes, a ready-to-use polishing cream such as Flagstone Fix Power Shine Liquid is the easiest choice. It restores shine and removes minor scratches with minimal equipment. Patch test first, as some black, green and white marbles respond differently.

Can I polish marble myself or do I need a professional?

You can restore gloss on a smooth but dull floor yourself with a polishing cream and a pad or buffing machine. Deep scratches, etching and uneven tiles need diamond grinding, which is a job for a professional marble polishing service.

What is the difference between marble polish liquid and marble polish powder?

Liquids and creams are buffed onto a floor that is already smooth to bring back the gloss. Powders are mixed with water and machine-applied as the last stage of re-polishing after diamond grinding, giving a deeper, mirror-like finish.

How often should a marble floor be polished?

It depends on traffic. Busy commercial floors are often spray buffed with a crystalliser every few weeks, while homes may only need a cream polish once or twice a year if the floor is cleaned with a neutral cleaner and protected with mats.

Does marble polish work on granite?

Marble-only polishes and crystallisers are made for calcareous stone and do little on granite. Use a granite polishing cream such as Faber Star Shine, or a universal cream like Faber Universal Glossy for floors that mix marble and granite.

Buy marble polish from Flagstone Fix

Flagstone Fix supplies the full Faber Italy Tile & Stone Care range to homes, hotels, contractors and facility teams across India. Browse our marble polish range, use the Product Finder to match a product to your floor, or ask for bulk pricing. Not sure what your marble needs? Send a photo on WhatsApp at +91 87792 40420 and our team will recommend the right polish.

Products mentioned in this guide

Share your love
Chat with us