FS POWER SHINE POWDER
Polishing Powder for a Mirror-Like Finish on Calcareous Stone Surfaces
Description
FS POWER SHINE POWDER is a ready-to-use polishing powder specifically designed to re-polish worn stone surfaces and restore their original shine. When applied with minimal equipment, it provides a high-gloss, mirror-like finish and helps recover the surface’s luster. The innovative crystallizer technology offers superior gloss in a significantly shorter time frame compared to traditional restoration and polishing systems.
Downloads
Areas of Application
Calcareous Stone
FAQs
What is FS POWER SHINE POWDER used for?
FS POWER SHINE POWDER is a ready-to-use polishing powder designed to re-polish worn calcareous stone surfaces. It restores the original shine and delivers a high-gloss, mirror-like finish.
How should the surface be prepared before using FS POWER SHINE POWDER?
Ensure the surface is free from dirt, oil, coatings, and debris before application. Heavily worn floors should be reworked up to a 3000-grit diamond pad before polishing.
Can FS POWER SHINE POWDER be used on newly laid floors?
Yes, newly laid floors should be honed up to a 3000-grit diamond pad before applying the polishing powder. This ensures consistent surface preparation and a uniform finish.
How is FS POWER SHINE POWDER applied on the surface?
Mix 1 part powder with 3 parts water and apply using a 175 RPM single-disc machine with a red pad. Buff the surface for 3–4 minutes per square metre, keeping the slurry creamy and evenly spread.
What is the coverage area of FS POWER SHINE POWDER?
One bottle covers approximately 800–900 sq. ft., depending on the surface type and application method. Actual coverage may vary based on the stone condition.