MA 90

MA 90 Semi-Gloss Stain-Proof Colour Enhancer for Natural Stone

Price & buy on zyax.in Ask about this product on WhatsApp

Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.

See it in action

MA 90: fixing loose stone and tilesHigh-strength adhesive for re-fixing loose stone and tile.

Not sure it suits your stone? Send us a photo on WhatsApp

Switching from Roff Ager? This is our closest match for the same job. Compare Akemi and Roff alternatives

Description

Faber MA 90 is a solvent-based semi-gloss colour enhancer for natural stone and non-polished materials with medium to medium-high absorption. It enhances colour with a satin finish, gives water-repellent and stain-proof protection, resists UV without yellowing and suits indoor and outdoor surfaces.

MA 90 is a solvent-based, stain-proof colour enhancer with excellent properties to leave a semi-gloss satin finish on natural stone and materials with non-polished finishes and a medium to medium-high degree of absorption.

MA 90 is able to enhance the color and provide a semi-polished finish to the material on which it is applied. It provides excellent water-repellent and stain-proof features. It’s UV resistant, it won’t yellow over time, and is suitable for use on indoor and outdoor surfaces.

Where to use MA 90

Natural stone with medium to medium-high absorbency, including honed marble, travertine, limestone and granite, and lava stone, basalt, sandstone, quartzite, slate, cotto, cement tiles and concrete. Not suitable for polished surfaces.

Key benefits of MA 90

  • Enhances tone and colour with a satin wet-look effect
  • Protects against water- and oil-based stains
  • Solvent-based
  • Makes maintenance easier

MA 90 compared with other Faber colour-enhancing stain protectors

ProductBest for
MA 90Solvent-based, for medium to medium-high absorbency stone; satin wet-look
MA 90/VSolvent-based, for medium-high to highly absorbent stone; deeper, glossier wet-look
P147Solvent-based, for medium to medium-high absorbency stone; matt wet-look
P 147 BLACKP147 formulated specifically for black-coloured surfaces
WET LOOK ECOWater-based; for materials with medium-high absorption; satin or matt wet-look, no surface patina
DEEP ENHANCERSolvent-based, for low-absorbency stone and quartz agglomerates; matt wet-look
DEEP ENHANCER BLACKDEEP ENHANCER formulated specifically for black-coloured surfaces

Not sure which product you need?

Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.

Product information based on Faber Italy technical documentation.

Coverage: about 15–20 m² (161–215 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.

Guide: for how and when to use it, read our guide to sealing honed granite and Kota.

How to use

  1. Clean surface thoroughly, protect adjacent surfaces; surface must be dry
  2. Run a preliminary test on an unexposed area
  3. Apply an even, abundant coat over the whole surface
  4. After 5-10 min spread excess with same tool until even
  5. Optional: after at least 4-6 h, once dry, buff with floor polisher (white/lambswool disc) or hand polisher
Coatsone coat
Drying and curingdries within 1-2 hours; resume use after 4-6 hours
Application temperature+5 to +35°C
Toolsbrush, lambswool applicator, roller, cloth; floor polisher for buffing

Before you start:

  • Do not apply to polished surfaces
  • Do not apply to wet/damp or overly heated surfaces, or if rain/frost is imminent

Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).

Helpful guides for MA 90

Chat with us