Wet-Look Sealing for Very Porous Stone: Sandstone, Cotto, Slate
Thirsty sandstone, terracotta or slate that drinks every sealer? How to get a deep wet look and stain protection on highly absorbent stone.

Some stones simply drink sealer, so a wet look sealer for porous stone has to be chosen with care. Rough sandstone, handmade terracotta and cotto tiles, slate, tuff and lava stone are so absorbent that ordinary treatments vanish into them and leave the surface looking dry, dusty and pale. These are also the stones that pick up oil spots on a terrace or water marks on an outdoor sit-out first.
If you want these surfaces to look rich and darker, as they do when wet, and also resist stains, you need an enhancer designed for high absorbency. This guide is for homeowners, architects and applicators working with very porous stone. It explains how to use Faber MA 90/V, a solvent-based colour enhancer and wet-look protective treatment for highly absorbent materials.

What Faber MA 90/V is (and when to use it)
Faber MA 90/V is a solvent-based, stain-proof colour enhancer for natural stone and non-polished materials with a medium-high to high degree of absorption. According to its technical data sheet, it gives an in-depth wet look even on extremely absorbent materials, with a semi-polished finish and a warm colouring that brings out the grain and veining.
- stain-proof, with strong water and oil repellency;
- strong colour enhancement, even on extremely absorbent stone;
- increases surface shine (semi-gloss);
- resistant to UV rays and will not yellow over time;
- suitable for indoor and outdoor surfaces.
Suitable stones: slate, sandstone, Basaltina (lava rock), cementina (cement tiles), cotto, granite, limestone, marble, reconstituted (eco) stone, porphyry, quartzite, terracotta, travertine and tuff, in non-polished finishes.
Not suitable: polished surfaces. If your stone is only moderately absorbent and you prefer a softer satin look, its sister product Faber MA 90 is the better match.
What you need
- Faber MA 90/V (1 litre bottles or 5 litre cans)
- Brush, lambswool applicator or roller
- For optional buffing: a floor polisher (1.5 HP, 175 rpm) with a white or lambswool disc or wool-cotton attachment; for tops, walls and small areas, an orbital or manual wheel with a white pad, or a felt or wool-cotton cloth
- Masking tape and sheeting for adjacent surfaces
- White spirit for cleaning tools
- Solvent-resistant gloves, eye protection and a mask suitable for solvent vapour
Step-by-step: applying a wet look sealer for porous stone
- Clean the surface carefully, removing all dust and dirt.
- Check it is completely dry. Never apply Faber MA 90/V to wet or damp surfaces.
- Check the temperature. The surface should be between +5°C and +40°C and not overheated. On Indian terraces, avoid midday sun; work early morning or late afternoon.
- Protect adjacent surfaces that are not being treated.
- Test a small, unexposed area or a spare piece to check the look.
- Apply an even, abundant coat with your chosen tool, covering the whole area. Coverage is 15 to 20 m2 per litre.
- Even out the excess. After about 5 to 10 minutes, spread any surplus product with the same tool until the surface looks even. On very absorbent stone this may not be needed.
- Leave it alone to dry. Do not touch up the area while it dries, or the finish may be patchy. It dries within 1 to 2 hours.
- Buff for extra shine (optional). After at least 4 to 6 hours, on a completely dry surface, dry-buff with the floor polisher and white or lambswool disc, or by hand or orbital tool on smaller areas.
- Open to traffic about 4 to 6 hours after application.
Tips and common mistakes
- Do not apply when rain or frost is likely, or in mist, fog or high humidity. During the monsoon, wait for a properly dry spell.
- On newly laid or grouted floors, wait for the adhesive and grout to cure completely first.
- If the stone has already been primed with a penetrating water repellent, let that dry completely before applying Faber MA 90/V.
- For routine cleaning afterwards, the data sheet recommends Faber Algafloor; for heavy cleaning, FABER 30 or Faber Deterfug depending on the stone; and Faber DEC 21 and/or DECERA P if you ever need to strip the treatment.
Safety and storage
Faber MA 90/V is a solvent-based product with a mineral-spirit odour and a flash point of 30°C. Its data sheet lists these hazards: highly flammable liquid and vapour; may be fatal if swallowed and enters airways; may cause drowsiness or dizziness; repeated exposure may cause skin dryness or cracking.
- Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking, and switch off gas burners and pilot lights nearby.
- Avoid breathing the vapour. Ventilate well and wear a suitable mask, solvent-resistant gloves and eye protection.
- If on skin or hair, remove contaminated clothing and rinse with water. If swallowed, do not induce vomiting; get medical help.
- Wash tools with white spirit, and dispose of solvent-soaked rags safely.
- Keep the container tightly closed in a cool, dry place, out of reach of children. Shelf life is 24 months in the original sealed pack (1 litre bottles and 5 litre cans).
Frequently asked questions
What is the difference between Faber MA 90/V and Faber MA 90?
Both are solvent-based colour enhancers from the same family. Faber MA 90/V is made for stone with medium-high to high absorption and gives an in-depth wet look even on extremely absorbent materials. Faber MA 90 is for medium to medium-high absorption and leaves a semi-gloss satin finish.
Can I use Faber MA 90/V on polished marble or granite?
No. The data sheet states that the product is not suitable for polished surfaces. It is meant for non-polished, absorbent finishes.
How soon can I walk on the floor after applying it?
The product dries within 1 to 2 hours, and the surface can be opened to foot traffic about 4 to 6 hours after application.
Need help?
You can buy Faber MA 90/V from Flagstone Fix, and we are happy to help you choose the right wet look sealer for porous stone in your space. If you would like it done for you, our Natural Stone Cleaning + Sealing team can clean, enhance and seal porous floors and walls. WhatsApp +91 87792 40420.

Faber MA 90/V
Faber MA 90

