
PROTW LUX LO
PROTW LUX LO Low-Odour Stain-Proof Sealer for Natural Stone
Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.
Description
Faber PROTW LUX LO is a solvent-based, low odour stain protector for polished stone, brushed or fine-honed surfaces, and agglomerates and natural stones with medium to medium-low absorption. It is easy to apply, forms no surface film and keeps the material breathable.
PROTW LUX LO is a solvent-based, low-odour, stain-proof protective treatment formulated for agglomerates and natural stones with medium to medium-low absorption, including polished, brushed, or fine-honed surfaces. The product is easy to apply, does not form a surface film, and preserves the natural breathability of the material.
Where to use PROTW LUX LO
Natural stone, agglomerates, cotto and concrete, especially indoors or in occupied spaces where low odour matters. Suitable for floors, walls, stairs, countertops, vanities and tables.
Key benefits of PROTW LUX LO
- Low-odour formula
- Prevents water- and oil-based stains from soaking in
- Natural look: does not change the colour of the stone (it may bring out the colour of surfaces that are more sensitive to changes in tone)
- Can be applied over a water-repellent treatment for maximum protection
PROTW LUX LO compared with other Faber natural-look stain protectors
| Product | Best for |
|---|---|
| PROTW LUX | High performance, solvent-based, natural look |
| PROTW LUX LO | Low-odour version of PROTW LUX, natural look |
| B1 700 | Fast-drying, high performance, solvent-based, natural look |
| PROTEX | Fast-drying, solvent-based, natural look |
Not sure which product you need?
Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.
Product information based on Faber Italy technical documentation.
Coverage: about 10–15 m² (108–161 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.
Guide: for how and when to use it, read our marble sealer guide.
How to use
- Clean surface of dust and dirt; protect adjacent surfaces
- Apply an even, thin coat on clean, dry surface
- On polished/brushed surfaces, after 10-15 minutes redistribute and remove excess with a dry cloth
| Coats | One even, thin coat |
|---|---|
| Drying and curing | Dries within 60 minutes; open to traffic after about 2-3 hours |
| Application temperature | +5 to +35°C |
| Tools | Brush, lambswool applicator, roller, cloth |
Before you start:
- Never apply to wet/damp or overheated surfaces; not with imminent rain/frost or high humidity
- Test a small unexposed area first
Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).
