SAFE MARBLE

SAFE MARBLE Anti-Slip Treatment for Marble & Limestone

Price & buy on zyax.in Ask about this product on WhatsApp

Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.

Description

Faber SAFE MARBLE is a water-based anti-slip treatment for marble floors, travertine, limestone and other lime-based floors. It acts on the surface to create micro-erosion invisible to the eye, boosting water run-off to increase grip and reduce slipping in wet conditions with footwear or bare feet.

SAFE MARBLE is a water-based treatment specifically devised and developed to increase surface grip on marble, travertine, limestone and lime-based floors, removing the problems linked to their slippery surfaces.

SAFE MARBLE is acts directly on the surface of the material to which it is applied, creating micro-erosions that are invisible to the naked eye and which boost the run-off of water to increase surface grip and therefore reduce slipping in wet conditions, either with footwear or bare feet.

Where to use SAFE MARBLE

Marble, limestone, travertine and other carbonate-based floors that become slippery when wet. Always carry out a preliminary test to set the contact time, and never apply to wet surfaces or in direct sunlight.

Key benefits of SAFE MARBLE

  • Increases grip on wet marble floors
  • Does not change the original look of the floor
  • Creates no surface film
  • Long-lasting solution that needs no maintenance

SAFE MARBLE compared with other Faber anti-slip treatments

ProductBest for
YS ONEGranite, ceramic, porcelain tiles and other silica-based surfaces
SAFE MARBLEMarble, limestone, travertine and other carbonate-based surfaces

Not sure which product you need?

Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.

Product information based on Faber Italy technical documentation.

Coverage: about 20–30 m² (215–323 sq ft) per litre, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.

Guide: for how and when to use it, read our anti-slip treatment guide.

How to use

  1. Clean surface, remove existing treatments, protect adjacent surfaces; surface as dry as possible
  2. Test contact time on a hidden area (granite 60-90 min; soft limestone/marble 10-20 min; hard lime-based 15-30 min)
  3. Apply an even, abundant coat undiluted
  4. Keep surface evenly wetted for the test time, redistributing/adding product
  5. Remove excess (optionally liquid vacuum) and rinse immediately with plenty of clean water
  6. Open to traffic once fully removed and rinsed
Dilutionundiluted
Coatsone abundant coat
Drying and curingcontact 10-90 min per test; traffic once fully removed and rinsed
Application temperature+5 to +40°C surface; coolest part of day
Toolsbrush, lambswool applicator, roller

Before you start:

  • Never apply to wet surfaces or in direct sunlight
  • Always run a preliminary test

Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).

Helpful guides for SAFE MARBLE

Chat with us