
WET LOOK ECO
WET LOOK ECO Colour Enhancer for Granite, Natural Stone & Travertine
Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.
See it in action
Switching from Akemi Colour Intensifier? This is our closest match for the same job. Compare Akemi and Roff alternatives
Description
Faber WET LOOK ECO is a water-based wet look colour enhancer that impregnates natural stone, agglomerates, cotto and terracotta of medium-high absorption. It enhances colour and tone with a satin or matt finish, is stain-proof and penetrates deep without creating a surface film.
WET LOOK ECO is a water-based, impregnating, colour-enhancing, stain-proof, and wet-look non-filming treatment. It is used to enhance the colour, and tone of absorbent surfaces, adding a satin or matt finish, depending on the surface, without creating a surface film. WET LOOK ECO is recommended for treating natural stone, agglomerates, cotto, and terracotta, and all materials with a medium-high level of absorption.
Compared to traditional wet-look colour enhancers, WET LOOK ECO penetrates deep into the materials without creating a surface film, and it is extremely simple to apply without the risk of uneven aesthetic finishes.
Where to use WET LOOK ECO
Absorbent materials with medium-high absorption: aged, brushed and honed marble, travertine, limestone and granite, plus lava stone, basalt, sandstone, quartzite, slate, cotto, cement tiles and concrete. Not suitable for porcelain tiles or quartz.
Key benefits of WET LOOK ECO
- Water-based colour enhancer
- Suits materials with medium-high absorption
- Wet-look effect with no surface patina
- Protects against water- and oil-based stains
WET LOOK ECO compared with other Faber colour-enhancing stain protectors
| Product | Best for |
|---|---|
| MA 90 | Solvent-based, for medium to medium-high absorbency stone; satin wet-look |
| MA 90/V | Solvent-based, for medium-high to highly absorbent stone; deeper, glossier wet-look |
| P147 | Solvent-based, for medium to medium-high absorbency stone; matt wet-look |
| P 147 BLACK | P147 formulated specifically for black-coloured surfaces |
| WET LOOK ECO | Water-based; for materials with medium-high absorption; satin or matt wet-look, no surface patina |
| DEEP ENHANCER | Solvent-based, for low-absorbency stone and quartz agglomerates; matt wet-look |
| DEEP ENHANCER BLACK | DEEP ENHANCER formulated specifically for black-coloured surfaces |
Not sure which product you need?
Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.
Product information based on Faber Italy technical documentation.
Coverage: about 15–20 m² (161–215 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.
How to use
- Clean surface, protect adjacent surfaces; surface must be dry
- Run a preliminary test on an unexposed area
- Dilute by absorbency: undiluted (high absorbing/rough), 1:1 water (medium-high), 1:2 water (medium/compact)
- Apply a thin, even layer over the whole surface
- On less absorbent surfaces remove residue within 5 min max with same tool, or buff with single-disc/hand polisher (white then felt pad) for satin finish
- Second coat on high-absorbing surfaces after at least 2-3 hours
| Dilution | undiluted, 1:1 or 1:2 in water depending on absorbency |
|---|---|
| Coats | one coat; second coat on high-absorbing surfaces after 2-3 h |
| Drying and curing | dries within 1-2 hours; resume use after 4-6 hours |
| Application temperature | +5 to +40°C (instructions section says +5 to +35°C) |
| Tools | brush, lambswool applicator, roller; single-disc machine or hand polisher for buffing |
Before you start:
- Not suitable for porcelain tiles or quartz
- Do not apply to wet/damp or overly heated surfaces, or if rain/frost is imminent
Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).
