

FS SEALER PLUS
FS SEALER PLUS Silane-Siloxane Stone Sealer for Porous Natural Stone
Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.
Downloads
Description
Flagstone Fix SEALER PLUS is a ready-to-use, water-based silane siloxane water repellent sealer for porous natural stone and mineral surfaces. It reacts with substrate moisture to form an invisible barrier that reduces water absorption while staying breathable, with alkali resistance, a tack-free finish, curing in a minimum of 48 to 72 hours and coverage of 30 to 60 sq ft per litre.
FS SEALER PLUS is a ready-to-use, water-based blend of silanes and siloxanes that delivers deep-penetrating water repellency and impregnation for porous natural stone and mineral surfaces. Reacting with substrate moisture, it forms an invisible active barrier that reduces water absorption while preserving breathability. The formulation provides fast water repellency, alkali resistance, and a tack-free finish, curing in a minimum of 48–72 hours, covering 30–60 sq ft per litre. It is not suitable for gypsum and does not protect against acidic substances.
Coverage: about 2.8–5.6 m² (30–60 sq ft) per litre per coat, according to the product data. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.
How to use
- New surfaces can be treated once cured; clean older or weathered surfaces thoroughly, including any algae or moss
- Mask areas you do not want treated
- Do a patch test, as some surfaces may darken slightly
- Apply liberally with a saturated brush, roller or mop
- Apply 2 to 3 coats wet-on-wet, each as soon as the previous one has soaked in and looks matte
- Leave no excess or damp patches; protect from rain and direct sun until cured
| Dilution | Ready to use |
|---|---|
| Coats | 2 to 3, wet-on-wet |
| Drying and curing | At least 48 to 72 hours to cure |
| Tools | Brush, roller or mop |
Before you start:
- Do not apply in heavy rain or when rain is expected
- Does not protect against acids
- Not suitable for gypsum
Directions summarised from the Flagstone Fix technical data sheet. Read the full data sheet (PDF).


