
GUARD-S
GUARD-S UV-Resistant Stain Protection Treatment for Natural Stone
Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.
Description
Faber GUARD-S is a solvent-based stain protector for terracotta, natural stone and agglomerates. It keeps the material’s natural appearance without changing its colour, gives long-lasting UV-resistant stain protection and can be combined with a deep-penetrating, water-resistant sealer.
GUARD-S is a solvent-based, stain-resistant treatment formulated for terracotta, natural stone, and agglomerates. The product preserves the material’s natural appearance without changing its color, provides long-lasting, UV-resistant stain protection, and can be used in combination with a deep-penetrating, water-resistant sealer.
Coverage: about 10–15 m² (108–161 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.
How to use
- Thoroughly clean surface of dust and dirt; protect untreated areas
- Test on an unexposed area
- Apply a thin, even layer covering the whole surface
- Wipe off excess with a dry clean cloth
- On highly absorbent materials apply second coat at least 30 minutes after the first
| Coats | One; second coat on highly absorbent materials (min 30 min apart) |
|---|---|
| Drying and curing | Dries within 40 minutes; resume use after 2-3 hours |
| Application temperature | +5 to +40°C |
| Tools | Lambswool applicator, roller, cloth |
Before you start:
- Do not apply to wet, humid or overheated surfaces
- If over a water-resistant sealer, let it dry completely first
Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).
