CONCRETE FINISH PLUS

Concrete Finish Plus Resin-Wax Finish

Price & buy on zyax.in Ask about this product on WhatsApp

Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.

Description

Faber CONCRETE FINISH PLUS is a concrete floor finish and sealer: a water-based resin-wax emulsion that leaves a satin, dirt-resistant surface built for heavy traffic.

CONCRETE FINISH PLUS is a water-based resin-wax emulsion designed as a finishing treatment for concrete floors. The product effectively seals the surface, providing a dirt-resistant layer that withstands heavy traffic and simplifies maintenance. CONCRETE FINISH PLUS imparts a satin finish and subtly enhances the color of the treated material. It is suitable for rough and textured concrete only and must not be applied to smooth concrete.

Coverage: about 15–20 m² (161–215 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.

How to use

  1. Clean surface of dust and dirt; pre-treat with a suitable sealer
  2. Test on an unexposed area
  3. Apply a thin, even layer on clean dry surface, same application direction, no heavy residues
  4. Distribute excess while still wet
  5. On absorbent/rough surfaces apply a second coat after 2-3 hours
CoatsOne; second coat may be needed on high-absorbing/rough surfaces (2-3 h between coats)
Drying and curingDries in 1-2 hours; resume use after 4-6 hours (TDS prints ‘6-4 hours’)
Application temperature+5 to +40°C
ToolsLambswool applicator, brush

Before you start:

  • Do not apply to smooth concrete
  • Never apply to wet or overheated surfaces

Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).

Helpful guides for CONCRETE FINISH PLUS

Chat with us