EPOXY RESIDUE REMOVER
EPOXY RESIDUE REMOVER for Tile & Grout
Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.
Switching from Akemi Intensive Cleaner? This is our closest match for the same job. Compare Akemi and Roff alternatives
Description
Faber EPOXY RESIDUE REMOVER is an alkaline epoxy grout residue remover for the films and haze left behind after grouting or sealing with epoxy-based products.
EPOXY RESIDUE REMOVER is an alkaline-based cleaner specifically developed to remove residues and films from grouting and sealing operations carried out using seals or epoxy-based products, quickly and easily. The product can be used for end-of-installation cleaning as well as to remove film or stains caused through incorrect or lack of cleaning once installation has been finished.
EPOXY RESIDUE REMOVER is also particularly effective for the removal of synthetic residues, even if stubborn and have been there for some time, such as graffiti, paint, and enamels.
Where to use EPOXY RESIDUE REMOVER
Every type of surface, after installing tiles or stone with epoxy grout or adhesive. On polished or glazed polished porcelain tiles, test first and reduce contact times if necessary.
Key benefits of EPOXY RESIDUE REMOVER
- Ready to use
- Alkaline formula that removes epoxy grout and adhesive residues
- Suitable for all surfaces
EPOXY RESIDUE REMOVER compared with other Faber cleaners
| Product | Best for |
|---|---|
| NEUGEL | Neutral daily cleaner for absorbent surfaces: natural stone, concrete, cotto, terracotta |
| ALGAFLOOR | Neutral daily cleaner for compact surfaces: ceramic, porcelain, agglomerates |
| FABER SOAP | Neutral cleaner with water-repellent action for polished stone; ideal after polishing |
| FABER 30 | Alkaline, extractive deep cleaner for high foot traffic dirt; all materials |
| COTTOSOLV | Alkaline cleaner for greasy dirt, oxidation, efflorescence, algae and mould; all materials |
| DETERFUG | Acidic deep cleaner for surface patina, even on textured surfaces; acid-resistant materials only |
| DISYCOTT | Acid cleaner for cement, grout and adhesive residues, paint and limescale; acid-resistant surfaces only |
| EPOXY RESIDUE REMOVER | Ready-to-use alkaline cleaner for epoxy grout and adhesive residues; all surfaces |
| DECERA/P | Alkaline stripper for old waxes, treatments and polymers; all materials |
| DEC 21 | Solvent stripper for old waxes and treatments; can be paired with an alkaline stripper for double stripping |
Not sure which product you need?
Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.
Product information based on Faber Italy technical documentation.
Coverage: about 10–15 m² (108–161 sq ft) per litre, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.
Guide: for how and when to use it, read our epoxy grout guide.
How to use
- Remove dust and debris; test on an unexposed area; work small areas (max 4-5 m2 on terracotta)
- Apply ready to use, keeping the surface covered by a fine layer
- Leave 10-15 min (light residues) or 20-30 min (hardened residues), working it now and then
- Add water to emulsify, remove with a wet vacuum and rinse thoroughly
- Repeat if not satisfactory; open to use once dry
| Dilution | ready to use (undiluted) |
|---|---|
| Coats | repeat the operation if needed |
| Drying and curing | contact 10-15 min light / 20-30 min hardened residues; use once dry |
| Tools | single-disc machine or hard floor cleaner; white pad (polished/delicate) or green/light blue pad (rough); wet vacuum |
Before you start:
- Do not apply to wet or overheated surfaces
- Test first; on polished/glazed porcelain reduce contact times if necessary
Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).