OXIDANT

OXIDANT Stain Remover for Marble & Natural Stone

Price & buy on zyax.in Ask about this product on WhatsApp

Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.

See it in action

Oxidant: removing yellowing, damp and tannin stainsHow Oxidant takes out yellowing, damp marks and tannin (leaf, tea, wood) stains from stone.
Removing rust stains from marbleMar Gel Plus followed by Oxidant to lift rust marks from marble.

Not sure it suits your stone? Send us a photo on WhatsApp

Description

Faber OXIDANT is a water-based yellowing and damp stain remover for stone and other materials. It removes yellow stains from rising damp or water penetration, damp and dark water marks on natural stone, nicotine and tannin stains, and the purple residue left after rust removal with MAR GEL PLUS.

OXIDANT is a water-based stain remover to definitively solve specific types of stain on different types of material. The special, unique formula makes it a definitive, effective solution to:

> Remove yellowing and yellow stains caused through rising damp or water penetration of surfaces;

> Remove damp stains from materials or dark marks caused by water absorption on natural stone.

> Remove stubborn stains such as nicotine and tannin

> Complete the rust removal stage from marble and lime-based material, removing the purple residue from the extraction action of MAR GEL PLUS

Where to use OXIDANT

All natural stone, agglomerates, concrete, porcelain, ceramic, cotto and terracotta affected by organic or humidity stains. Apply only to dry or slightly damp surfaces, and never mix OXIDANT with other chemicals except FABER POULTICE.

Key benefits of OXIDANT

  • Removes tannin, nicotine and humidity watermarks
  • Effective on stubborn stains
  • Can be thickened with FABER POULTICE

OXIDANT compared with other Faber stain removers

ProductBest for
NO MAC GELCoffee, drinks, ink, mould and algae
NO OILFood oils, motor and mineral oils, greasy stains
MAR GEL PLUSRust on marble and other acid-sensitive materials
NO RUGRust on acid-resistant materials such as granite and porcelain
OXIDANTTannin, nicotine, humidity watermarks and stubborn stains
FABER POULTICEThickener that turns liquid stain removers into a paste
EPOXY REMOVERStubborn epoxy residues, varnishes, resins and graffiti

Not sure which product you need?

Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.

Product information based on Faber Italy technical documentation.

How to use

  1. Protect adjacent surfaces; clean surface; strip wax with Double Stripping if waxed
  2. Run a preliminary test on an unexposed area
  3. Pour ready-to-use product onto the stain, covering it completely with a thick layer
  4. Leave to act: 8-24 h for yellowing/damp stains, 2-8 h for nicotine/tannin, 1-6 h after NO MAC GEL; twice the MAR GEL PLUS time when used after it
  5. For long treatments cover with plastic sheet; after removing it leave exposed 30-60 min
  6. Remove residues with paper towels/cloths or broom/damp mop, wipe with damp cloth, rinse and let dry fully before foot traffic
Dilutionready to use
Coatsrepeat application if result not satisfactory
Drying and curingcontact 1-24 h depending on stain; wait until floor is completely dry before foot traffic
Application temperaturenot on overly heated surfaces; apply in coolest periods of the day
Toolsbrush, spatula, direct application

Before you start:

  • Never mix with other chemicals except FABER POULTICE
  • Never use on wet surfaces or in sunlight

Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).

Helpful guides for OXIDANT

Chat with us