
W-STAIN
W-STAIN Water-Based Stain-Resistant Treatment for Natural Stone
Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.
Switching from Akemi Stain Repellent W? This is our closest match for the same job. Compare Akemi and Roff alternatives
Description
Faber W-STAIN is a water-based stain protector for stone and terracotta, suitable for natural stone and agglomerates. It is easy to apply, forms no surface film, keeps the material breathable and can be used as a second-step stain-resistant treatment after a water-resistant, deep-penetrating sealer.
W-STAIN is a water-based, stain-resistant treatment suitable for natural stone, agglomerates, and terracotta. It is easy to apply and does not create a surface film, preserving the natural breathability of the material. W-STAIN can be used as a second-step stain-resistant treatment following the application of a water-resistant, deep-penetrating sealer.
Coverage: about 15–20 m² (161–215 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.
How to use
- Clean surface thoroughly, removing all dust and dirt; protect areas not to be treated
- Test on an unexposed area or unused piece first
- Apply a thin, even layer on clean, dry surface covering the whole surface
- On compact/low-absorbing materials remove unabsorbed residues with a dry clean cloth
- On high-absorbing surfaces apply a second coat after one hour
| Coats | One; second coat after 1 hour on high-absorbing surfaces |
|---|---|
| Drying and curing | Dries within 1 hour; resume use after 2-3 hours |
| Application temperature | +5 to +40°C |
| Tools | Brush, cloth, lambswool applicator |
Before you start:
- Do not apply on wet or humid surfaces
- Over a water-resistant sealer, wait until surface is completely dry before applying
Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).
