WET LOOK ECO

WET LOOK ECO Colour Enhancer for Granite, Natural Stone & Travertine

Price & buy on zyax.in Ask about this product on WhatsApp

Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.

See it in action

Wet Look Eco: a wet-look finish for natural stoneEco-friendly treatment that gives natural stone a vibrant wet look.

Not sure it suits your stone? Send us a photo on WhatsApp

Switching from Akemi Colour Intensifier? This is our closest match for the same job. Compare Akemi and Roff alternatives

Description

Faber WET LOOK ECO is a water-based wet look colour enhancer that impregnates natural stone, agglomerates, cotto and terracotta of medium-high absorption. It enhances colour and tone with a satin or matt finish, is stain-proof and penetrates deep without creating a surface film.

WET LOOK ECO is a water-based, impregnating, colour-enhancing, stain-proof, and wet-look non-filming treatment. It is used to enhance the colour, and tone of absorbent surfaces, adding a satin or matt finish, depending on the surface, without creating a surface film. WET LOOK ECO is recommended for treating natural stone, agglomerates, cotto, and terracotta, and all materials with a medium-high level of absorption.

Compared to traditional wet-look colour enhancers, WET LOOK ECO penetrates deep into the materials without creating a surface film, and it is extremely simple to apply without the risk of uneven aesthetic finishes.

Where to use WET LOOK ECO

Absorbent materials with medium-high absorption: aged, brushed and honed marble, travertine, limestone and granite, plus lava stone, basalt, sandstone, quartzite, slate, cotto, cement tiles and concrete. Not suitable for porcelain tiles or quartz.

Key benefits of WET LOOK ECO

  • Water-based colour enhancer
  • Suits materials with medium-high absorption
  • Wet-look effect with no surface patina
  • Protects against water- and oil-based stains

WET LOOK ECO compared with other Faber colour-enhancing stain protectors

ProductBest for
MA 90Solvent-based, for medium to medium-high absorbency stone; satin wet-look
MA 90/VSolvent-based, for medium-high to highly absorbent stone; deeper, glossier wet-look
P147Solvent-based, for medium to medium-high absorbency stone; matt wet-look
P 147 BLACKP147 formulated specifically for black-coloured surfaces
WET LOOK ECOWater-based; for materials with medium-high absorption; satin or matt wet-look, no surface patina
DEEP ENHANCERSolvent-based, for low-absorbency stone and quartz agglomerates; matt wet-look
DEEP ENHANCER BLACKDEEP ENHANCER formulated specifically for black-coloured surfaces

Not sure which product you need?

Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.

Product information based on Faber Italy technical documentation.

Coverage: about 15–20 m² (161–215 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.

How to use

  1. Clean surface, protect adjacent surfaces; surface must be dry
  2. Run a preliminary test on an unexposed area
  3. Dilute by absorbency: undiluted (high absorbing/rough), 1:1 water (medium-high), 1:2 water (medium/compact)
  4. Apply a thin, even layer over the whole surface
  5. On less absorbent surfaces remove residue within 5 min max with same tool, or buff with single-disc/hand polisher (white then felt pad) for satin finish
  6. Second coat on high-absorbing surfaces after at least 2-3 hours
Dilutionundiluted, 1:1 or 1:2 in water depending on absorbency
Coatsone coat; second coat on high-absorbing surfaces after 2-3 h
Drying and curingdries within 1-2 hours; resume use after 4-6 hours
Application temperature+5 to +40°C (instructions section says +5 to +35°C)
Toolsbrush, lambswool applicator, roller; single-disc machine or hand polisher for buffing

Before you start:

  • Not suitable for porcelain tiles or quartz
  • Do not apply to wet/damp or overly heated surfaces, or if rain/frost is imminent

Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).

Helpful guides for WET LOOK ECO

Chat with us