B1 700
B1 700 Stain-Proof Natural Stone Sealer
Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.
See it in action
Description
Faber B1 700 is a fast-drying, solvent-based stain protector for limestone and other natural stone that does not alter the material’s appearance. It suits surfaces sensitive to colour change from impregnators, creates no film, keeps breathability, resists UV without yellowing and works indoors and outdoors.
B1 700 is a protective, solvent-based, stain-proof treatment fast drying and specifically formulated to not alter the appearance of the materials on which it is applied in any way, leaving the surface with high stain-proof performance. The product is particularly recommended on all surfaces that are sensitive to colour changes following the application of an impregnating agent.
Due to these characteristics, B1 700 is a great solution for treating natural stone, such as limestone, which are generally difficult to protect due to changes in colour. It’s quick and easy to apply, it doesn’t create any film and therefore, it does not change the original breathability of the treated surface. It’s UV resistant, it won’t end up yellowing over time and is suitable for use indoors and outdoors.
Where to use B1 700
Natural stone, agglomerates, cotto and terracotta. Recommended for polished finishes on marble, travertine, limestone, granite, lava stone, basalt and agglomerates.
Key benefits of B1 700
- Fast-drying
- High performance stain resistance against water- and oil-based stains
- Natural look: does not change the colour of the stone
- Can be applied over a water-repellent treatment for maximum protection
B1 700 compared with other Faber natural-look stain protectors
| Product | Best for |
|---|---|
| PROTW LUX | High performance, solvent-based, natural look |
| PROTW LUX LO | Low-odour version of PROTW LUX, natural look |
| B1 700 | Fast-drying, high performance, solvent-based, natural look |
| PROTEX | Fast-drying, solvent-based, natural look |
Not sure which product you need?
Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.
Product information based on Faber Italy technical documentation.
Coverage: about 10–15 m² (108–161 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.
Guide: for how and when to use it, read our granite sealer guide.
How to use
- Clean surface thoroughly, protect adjacent surfaces; surface must be dry
- Run a preliminary test on an unexposed area
- Apply a thin, even layer over the whole surface
- Wipe off any residue with a clean, dry cloth
- Second coat on particularly absorbent surfaces, at least 30 min after the first
| Coats | one coat; second on very absorbent surfaces (min 30 min apart) |
|---|---|
| Drying and curing | dries within 30 minutes; resume use after 2-3 hours |
| Application temperature | +5 to +35°C |
| Tools | brush, lambswool applicator, roller, cloth |
Before you start:
- Never apply to wet or damp surfaces
- Do not apply if rain/frost imminent or in high humidity
Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).