
PROTEX
PROTEX Protective Treatment for Water, Oil & Stain Resistance
Sold online on zyax.in by Zyax Chem Pvt Ltd, the company behind Flagstone Fix.
Description
Faber PROTEX is a fast-drying, solvent-based food safe stain protector for kitchen countertops. It gives long-lasting stain resistance without changing the material’s colour and is certified safe for surfaces in contact with food.
PROTEX is a fast-drying, solvent-based, stain-resistant treatment. The product does not change the color of the material maintaining its natural look. The product provides long-lasting stain-resistant features to the material it applies. Certified safe for use on surfaces in contact with food, makes it the ideal solution for kitchen countertops.
Where to use PROTEX
Natural stone, agglomerates, cotto and terracotta, on floors, walls, stairs, countertops, vanities and tables.
Key benefits of PROTEX
- Fast-drying
- Prevents water- and oil-based stains from soaking in
- Natural look: does not change the colour of the stone
- Makes everyday maintenance easier
PROTEX compared with other Faber natural-look stain protectors
| Product | Best for |
|---|---|
| PROTW LUX | High performance, solvent-based, natural look |
| PROTW LUX LO | Low-odour version of PROTW LUX, natural look |
| B1 700 | Fast-drying, high performance, solvent-based, natural look |
| PROTEX | Fast-drying, solvent-based, natural look |
Not sure which product you need?
Every surface and finish behaves differently. Send us a photo of the surface and the approximate area on WhatsApp at +91 87792 40420 or email info@zyax.in, and our team will recommend the right product and quantity.
Product information based on Faber Italy technical documentation.
Coverage: about 10–15 m² (108–161 sq ft) per litre per coat, according to Faber’s technical data sheet. Actual coverage depends on how absorbent the surface is. Work out how much you need with our coverage calculator.
Guide: for how and when to use it, read our granite sealer guide.
How to use
- Clean surface thoroughly, remove dust and dirt, protect areas not to be treated
- Run a preliminary test on an unexposed area
- Apply a thin, even layer on clean, dry surface
- Remove residues with a dry clean cloth
- On high-absorbing materials apply a second coat after at least 45 minutes
| Coats | one coat; second coat on high-absorbing materials (min 45 min apart) |
|---|---|
| Drying and curing | dries within 45 minutes; resume use after 2-3 hours |
| Application temperature | +5 to +40°C |
| Tools | lambswool applicator, roller, cloth |
Before you start:
- Do not apply on wet, humid or overly heated surfaces
- Wait for new adhesive/grout to cure completely
Directions summarised from the Faber technical data sheet. Read the full data sheet (PDF).
