Scratched Glossy Vitrified Tiles: How to Repair Them

Scuffs, scratches and dull patches on polished vitrified tiles can be polished out with a dedicated kit for light and dark tiles. Step-by-step guide.

Glossy vitrified tiles are the default floor in a huge number of Indian flats and offices. They look like glass when new, but they scratch. Dragged furniture, grit under shoes, sofa legs and metal chair feet leave scuffs, fine scratches and dull patches, and once you notice them in the light from a window it is hard to unsee them. In many cases you can remove scratches from vitrified tiles without replacing a single one.

Replacing a tile means breaking it out and hunting for a matching batch. For surface scratches on polished porcelain there is a simpler option. This guide shows how to use the Faber Scratch Off Kit to polish them out, and is written for homeowners, facility managers and maintenance teams with access to a small polishing machine.

Remove scratches from vitrified tiles: Faber Scratch Off Kit

What the Faber Scratch Off Kit is (and when to use it)

The Faber Scratch Off Kit is a system for removing scratches, abrasions, dullness and defects from polished porcelain tiles, which is what most glossy vitrified tiles are. It contains three products and the pads to apply them:

  • SCRATCH OFF CLEANER (500 ml): a concentrated alkaline cleaner for deep preliminary cleaning
  • SCRATCH OFF LIGHT (250 ml): a water-based treatment for light-coloured polished porcelain
  • SCRATCH OFF DARK (250 ml): a water-based treatment for dark-coloured polished porcelain
  • 2 FAB K pads and 1 white pad

The treatments can be used before or after installation, indoors and outdoors.

When not to use it: it is designed for polished porcelain, so it may not suit other tiles or surfaces. Never use the Dark treatment on light-coloured tiles. Don’t apply it to wet or overheated surfaces.

What you need

  • The Faber Scratch Off Kit
  • A hand polisher or orbital tool with adjustable speed (700 to 1500 rpm)
  • Paper masking tape and plastic sheets
  • A bucket of clean water and absorbent paper
  • Gloves and eye protection

Step-by-step: how to remove scratches from vitrified tiles

  1. Dry clean first. Sweep or vacuum dust, debris and grit.
  2. Dilute the cleaner. For normal pre-restoration cleaning, dilute SCRATCH OFF CLEANER at 10%: 1 part product to 9 parts water. For stubborn, greasy dirt, use 20 to 30%: 1 part product to 2 to 4 parts water.
  3. Clean the tile. Spread the diluted cleaner with the white pad, leave it for about 10 minutes and rub with the pad from time to time. Remove residues and rinse well with clean water. Let it dry completely.
  4. Mask the area. Surround the scratch with paper tape and plastic sheet.
  5. Choose Light or Dark to match the tile colour and test on a hidden area or spare tile.
  6. Apply a few drops. Shake the bottle and put a few drops directly on the scratch.
  7. Spread before switching on. Use the FAB K pad on the tool, without running it, to spread the product along the whole scratch.
  8. Polish slowly. Switch on at 700 to 1500 rpm and move very slowly along the direction of the scratch. Keep the pad flat and don’t press hard; just guide it. Keep working until the product is completely dry.
  9. Check the heat and the result. If the surface becomes too hot to keep your hand on, stop and let it cool. If the scratch is still visible, repeat. Usually 3 to 5 applications are enough.
  10. Finish. Rinse with plenty of water, scrub with the white pad and dry with absorbent paper. The floor can be used once residues are removed and rinsed.

Tips and common mistakes

  • One scratch at a time. Don’t try to treat large areas in one go.
  • No heavy pressure. Let the pad and product do the work.
  • Don’t flood it with water. Excess water should not be used during application.
  • Let new grout cure before using the cleaner on recently laid tiles.

Safety and storage

The cleaner is strongly alkaline, so wear gloves and eye protection and follow the safety data sheet. Do not mix it with other chemicals. Keep children and pets away while you work. Equipment can be washed with water afterwards. Store all bottles tightly closed in a cool, dry place. Shelf life in the original sealed packs is 36 months for the cleaner and for the Light and Dark treatments.

Frequently asked questions

Can I use the Dark treatment on light-coloured tiles?

No. SCRATCH OFF DARK is for dark polished porcelain only and must not be used on light-coloured surfaces. Use SCRATCH OFF LIGHT for light tiles.

How many applications does a scratch need?

Usually 3 to 5 applications are enough. Deeper scratches or defects may need more, repeated until the surface is restored.

Do I need a machine?

Yes. The treatments are applied with a hand polisher or an orbital tool with adjustable speed, set to 700 to 1500 rpm, using the FAB K pads supplied in the kit.

Need help?

Buy the Faber Scratch Off Kit from Flagstone Fix to remove scratches from vitrified tiles yourself, or let our technicians handle it with our Scratch Removal service. WhatsApp +91 87792 40420 with photos of the scratched tiles.

Products mentioned in this guide

Share your love
Chat with us