Low-Odour Stone Sealer for Occupied Homes and Hotels

Need to seal polished marble in a lived-in flat or a hotel that can't close? A low-odour stain protector made for closed indoor spaces.

Sealing stone indoors has one big practical problem: the smell, which is why so many people look for a low odour stone sealer. Many solvent-based protectors have a strong odour, which is hard to manage in a flat where the family is still living, a hotel corridor next to occupied rooms, or an office that can’t shut for days.

This guide is for homeowners, hotel and hospital facility managers and contractors who need to stain-proof polished, honed or brushed stone in closed spaces. We use Faber PROTW Lux LO, a low-odour stain protector for natural stone and agglomerates.

Low odour stone sealer: Faber PROTW Lux LO

What Faber PROTW Lux LO is (and when to use it)

Faber PROTW Lux LO is a solvent-based, low-odour, stain-proof treatment for natural stone and agglomerates with medium or medium-low absorption, such as buffed, brushed or fine-polished surfaces. Because it is low odour, the data sheet says it can be used in closed areas where the smell of solvent-based products is a problem.

It gives water and oil repellency, forms no surface film and does not change the stone’s breathability. It is neutral and does not change colour, though on stones sensitive to absorption it may bring out the colour slightly. It is UV-resistant, does not yellow, works indoors and outdoors, and is certified for use with foods, so it can also be used on kitchen worktops.

Listed materials include marble, granite, limestone, sandstone, slate, basaltina, quartzite, porphyry, travertine, cotto, terracotta and marble or quartz agglomerates.

When not to use it: on wet or damp surfaces, overheated surfaces, or in high humidity, mist or fog. Low odour does not mean no vapour: it is still highly flammable and needs ventilation.

What you need

  • Faber PROTW Lux LO (1 litre or 5 litre)
  • Brush, lambswool applicator, roller or cloth
  • Clean, dry cloths for residues on polished or brushed stone
  • Masking tape for skirting, doors and fittings
  • White spirit for cleaning tools
  • Solvent-resistant gloves, eye protection and fans for ventilation

Step-by-step: How to use a low odour stone sealer in an occupied space

  1. Plan the zones. Close off one room or corridor section at a time so people can move around the rest of the space.
  2. Clean thoroughly. Remove all dust and dirt so nothing is sealed in.
  3. Make sure it is dry. Never apply to wet or damp stone. After wet cleaning, give the floor time to dry fully.
  4. Check conditions. The guidelines give a surface temperature of +5 to +35°C. Avoid applying in high humidity.
  5. Protect and ventilate. Mask surfaces you are not treating. Open windows or use fans, and switch off any open flames or sources of sparks.
  6. Test. Try a hidden area first, such as inside a wardrobe or under a bed.
  7. Apply a thin, even coat. Use your preferred tool and cover the area evenly. Coverage is about 10 to 15 m² per litre.
  8. Even out residues after 10 to 15 minutes. On polished or brushed surfaces it may leave light residues. Redistribute them with a dry cloth, cleaning and evening them out until fully removed.
  9. Dry and reopen. It dries within 60 minutes. The floor can take foot traffic after about 2 to 3 hours. Clean tools with white spirit.

Tips and common mistakes

  • Work room by room. With a 2 to 3 hour reopening time, you can treat a hotel floor or a flat in stages without closing everything.
  • Don’t skip the cloth step on polished marble. The data sheet notes that light residues may remain on polished or brushed surfaces, so even them out until fully removed.
  • Low odour isn’t a reason to seal the room shut. Keep air moving until the product is dry.
  • For routine cleaning the data sheet recommends Faber Neugel or Faber Algafloor, and FABER 30 or Faber Deterfug for extraordinary cleaning, depending on the stone.
  • For very absorbent stone where odour isn’t a concern, the related Faber PROTW Lux allows a second coat on very absorbent surfaces.

Safety and storage

  • Faber PROTW Lux LO is a highly flammable liquid and vapour. Keep away from heat, sparks, open flames and other ignition sources. No smoking.
  • It may be fatal if swallowed and enters the airways. Do not induce vomiting; get medical help.
  • It may cause drowsiness or dizziness. Avoid breathing vapours and keep the space ventilated.
  • Repeated exposure may cause skin dryness or cracking. If it gets on skin, remove contaminated clothing and rinse with water.
  • Wear suitable PPE, keep children and pets away, and follow the safety data sheet.
  • Store tightly closed in a cool, dry place. Shelf life is 36 months in the original sealed packaging.

Frequently asked questions

Does low odour mean I don’t need ventilation?

No. It is designed for closed areas where strong solvent smell is a problem, but it is still a highly flammable solvent product that may cause drowsiness. Ventilate and keep ignition sources away.

Can Faber PROTW Lux LO go on polished marble?

Yes. It is made for natural stone and agglomerates with medium or medium-low absorption, such as buffed, brushed or fine-polished surfaces. Wipe any light residues with a dry cloth after 10 to 15 minutes.

How is it different from Faber PROTW Lux?

Faber PROTW Lux LO is the low-odour version, aimed at medium and medium-low absorption stone in closed areas. Both are fast drying, film-free and certified for food use.

Need help?

Buy Faber PROTW Lux LO, our low odour stone sealer, from Flagstone Fix, or let our team handle it with minimal disruption through our Marble Cleaning + Sealing service. WhatsApp +91 87792 40420 to plan the work.

Products mentioned in this guide

Share your love
Chat with us